Advanced GD&T Competencies: Profile of a Surface     

Part of the SAE Geometric Dimensioning & Tolerancing Web Seminar Series
Web
Seminar
On-site
Delivery

I.D.# WB1320Printable Description
Duration: 1.5 Hours
Show Session Dates
April 7, 2015 (1 Session ) - Live Online
 
Show Session Dates
October 22, 2015 (1 Session ) - Live Online
 

While the topic of profile is covered in a basic Geometric Dimensioning & Tolerancing (GD&T) course, those discussions often ignore the variations allowed with these symbols that enable them to be used in complex ways. This advanced web seminar will clarify the proper use of the profile tolerances in GD&T and uncover the nuances of these two symbols. Since profile of a surface is arguably the most powerful GD&T symbol, its full potential will be explored. It can be used to control size, form, orientation, and location and its relationship to datums can be varied. Learning these advanced techniques will allow designers to better communicate certain requirements. The examples given in this session will also illustrate several of the new options for profile that were introduced in the ASME Y14.5-2009 standard.

Learning Objectives
By participating in this web seminar, you will be able to:

  • Explain when profile tolerances require a datum reference
  • Determine which aspects of GD&T a given profile tolerance controls
  • Interpret unilateral, bilateral, and nonuniform tolerances
  • Describe how to properly measure profile tolerances

Who Should Attend
This advanced-level course is intended for designers, product engineers, manufacturing engineers, manufacturing personnel, and quality/gaging inspectors with a basic knowledge of GD&T concepts. It is a companion to the Advanced GD&T Competencies: Datum Usage and Composite Positioning web seminars.

Prerequisites
For those new to GD&T, the Fundamentals of Geometric Dimensioning & Tolerancing Web Seminar is a recommended prerequisite.

Topical Outline

  • Review of profile of a surface and profile of a line
  • Using profile without datums
  • All around and all over
  • Locating a profile zone with toleranced dimensions
  • Using the MMB modifier with profile
  • Composite profile
  • The "U" modifier
  • Nonuniform tolerancing

Instructor(s): John-Paul Belanger
John Paul BelangerJohn-Paul Belanger is president of Geometric Learning Systems, a consulting firm specializing in geometric dimensioning and tolerancing (GD&T). For over ten years, he has trained people throughout North America and Europe in the proper interpretation and application of GD&T per the Y14.5 standard by using practical examples. Mr. Belanger is certified by the American Society of Mechanical Engineers as a Senior GD&T Professional, and has worked with a wide range of companies in the automotive, aerospace, electronic, and other industries to apply tolerances and perform stack calculations. He holds a B.S. in aerospace engineering from the University of Michigan specializing in aircraft design and safety.

Registration Information
Registration for this live web seminar is available on a per-person basis, similar to purchasing a seat in a classroom. Participants attend an online session from work or home; anywhere with a PC with internet access (at least 56K) and a telephone. The fee includes one connection to the conference calls (toll free telephone number provided for U.S. and select countries*) and assigned personal ID number; one connection to SAE's online training center (via WebEx); and access to a secure course in the SAE Learning Center that contains the presentations, class session recordings, supplemental materials, and assignments.

Registrations will be accepted until 5:00 p.m. the day before the start of the web seminar, but early registration is encouraged to allow for pre-course set-up and instructions.

*Global toll-free telephone numbers are provided for many countries outside the U.S., but are limited to those on the WebEx call-in toll-free number list. Check here to see if your country has a global call-in toll free telephone number for this web seminar. If your country is not listed, you may still connect using the US/Canada Call-in toll number or Voice over Internet Protocol (VoIP).

Although WebEx Training Manager will automatically launch when you join the web seminar, you or your system administrator are encouraged to download the plug-in in advance to help ensure successful setup. Click here, then follow the onscreen instructions.

NOTE: The course presentation will be recorded and made available for 30 days to those who register by the deadline.

Multiple Seat Discount - 50% off more than one!

  1. Register for this web seminar at the appropriate list or member price and enjoy a 50% discount off the list price of the other GD&T web seminars in this series (includes Fundamentals of Geometric Dimensioning & Tolerancing; Advanced GD&T Competencies: Datum Usage; Advanced GD&T Competencies: Composite Positioning).
  2. Register one individual at the appropriate list or member price, then register as many additional employees at half off the list price. To receive the discount, register all individuals at the same time or mention the confirmation number for the first registrant. The offer is good for only the same web seminar series and dates. All registrants will receive a personal account and opportunity for CEUs.
Discount applies to web seminar(s) of equal or lesser list fee. Registration by phone with SAE Customer Service is required to take advantage of these discounts.

Cancellations
Can't attend on the date/time above? The presentation will be recorded and made available for 30 days to those who are registered, regardless of availability for the live session. If you still need to cancel, transfer to a future offering, or designate a substitute, a full refund is issued if you notify SAE at least 14 days prior to the web seminar start date. If less than 14 days prior, please contact SAE Customer Service to discuss options*. NOTE: SAE reserves the right to cancel web seminar and cannot be held responsible for related costs incurred by registrants other than the registration fee.

*Cancellation penalties may apply.

Fees: $210.00 ; SAE Members: $168.00 - $189.00

.15 CEUs
You must complete all course contact hours and successfully pass the learning assessment to obtain CEUs.

To register, click Register button at the top of this page and submit the online form, or contact SAE Customer Service at 1-877-606-7323 (724/776-4970 outside the U.S. and Canada) or at CustomerService@sae.org.