Introduction to Commercial and Off-Road Vehicle Cooling Airflow Systems     

Web
Seminar

I.D.# WB1240Printable Description
Duration: 12 Hours
Show Session Dates
April 27-May 8, 2015 (6 Sessions ) - Live Online
 
Show Session Dates
October 5-16, 2015 (6 Sessions ) - Live Online
 

Vehicle functional requirements, diesel emission regulations, and subsystem thermal limits all have a direct impact on the design of a powertrain cooling airflow system. Severe duty cycles, minimal ram air, fouling, and sometimes unconventional package layouts present unique challenges to the designer. This web seminar introduces many airflow integration issues and vehicle-level trade-offs that effect system performance and drive the design.

The goal of this six-session course is to introduce engineers and managers to the basic principles of diesel cooling airflow systems for commercial and off-road vehicles. Participants will learn about vehicle/product constraints, integration issues, cooling airflow, system resistance, fans, shrouds, radiators, coolers, estimating heat rejection, thermal recirculation, and overall system performance. Basic concepts will be reinforced with examples and a cooling performance calculation of a diesel cooling system.

SAE Papers 2002-01-0256, 850281, 900001 and 740691 are included as references in the course materials.

Note: A similar course is available as a classroom seminar.

Learning Objectives
By participating in this web seminar, you will be able to:

  • Define vehicle requirements and many cooling airflow system integration issues
  • Describe heat exchanger sizing considerations, design alternatives, and thermal effectiveness
  • List fan/shroud aerodynamic design parameters, guidelines, and installation effects
  • Apply the fan laws to evaluate alternative designs
  • Calculate fan operating point and airflow using component pressure-loss coefficients
  • Estimate engine heat rejection to coolant, including Exhaust Gas Recirculation (EGR)
  • Calculate steady-state thermal performance of a diesel cooling airflow system

Who Should Attend
OEM and supplier engineers and managers who are involved with vehicle cooling systems, or who interface with vehicle program management on these issues, will benefit from this web seminar. Graduate-level students interested in cooling systems will also find it instructive.

Prerequisites
Participants should have an undergraduate engineering degree. Exposure to thermal product development is helpful, but not required.

Topical Outline
Session 1: Vehicle Perspective

  • Overview Typical Cooling Airflow Systems
  • Design Drivers
  • A Classification of Vehicle Cooling Systems
  • Industrial Air-cooled Heat Exchanger Assemblies
  • Impact of System & Sub-system Requirements
  • Thermal Recirculation
  • Design Challenges
Session 2: Key Concepts – System Heat Transfer Equation and Pressure Losses
  • 1st Law of Aerodynamics
  • Radiator Heat Transfer Equation
  • Definition of Standard Air
  • Airflow Terminology and Standard Cubic Feet per Minute (SCFM)
  • Bernoulli’s Equation and Ram Pressure
  • Pressure Loss Coefficient
  • Vehicle Air Flow Restrictions – Flow Energy Losses
  • Construct a System Pressure Loss Curve
Session 3: Fan Airflow
  • Fan Classification and Specific Speed
  • Fan Characteristic Curve and System Matching
  • Air Performance Test Chambers (AMCA)
  • Axial Fan Systems, Pusher and Puller
  • Exercise the Fan Laws to Evaluate Design Alternatives
  • Shroud Design Considerations
  • Vehicle Installation Effects – Fan Position, Tip Clearance, Radiator Proximity
Session 4: Fan and Ram Airflow Map
  • Ram Airflow
  • Flow Energy Balance Equation
  • Fan Operation with Ram
  • Ram Total-Pressure Recovery
  • Calculate System Loss Curve, Fan Operating Point and Cooling Airflow
Session 5: Compact Heat Exchangers
  • Thermal Classification of Heat Exchangers
  • Compact Heat Exchangers in Vehicle Applications
  • Radiator Effectiveness and Louvered Fins
  • Charge Air Coolers, Performance Calculation Against Requirements
  • Air-Side Fouling Study and Heat Exchanger Design Considerations
  • Thermal Accumulation Calculation
Session 6: Estimating Powertrain Heat Rejection
  • SAE Dynamometer Gross Power Test Procedures
  • Dynamometer Data on Engine Heat Rejection
  • Brake Mean Effective Pressure (BMEP), A Power Density
  • Specific Heat Rejection (SHR) Characteristic Curve
  • EGR Heat Rejection to Coolant
  • Evaluation of Diesel Cooling System
  • Tools and Methods for System Development

Instructor(s): Jack Williams
Jack Williams

Jack Williams is an independent consultant specializing in the design and development of thermal management systems and vehicle aerodynamics. He is an adjunct faculty member at the Lawrence Technological University (LTU) in the mechanical engineering department. In addition to his consulting work, he conducts professional development courses for engineers on cooling systems, EV/HEV battery thermal management, and road vehicle aerodynamics. Mr. Williams has over 30 years engineering management experience in product development at Ford Motor Co. Additionally, he was an aerodynamics project leader with the USAF Aeronautical Systems Division at Wright-Patterson Air Force Base, Ohio where he specialized in engine/aircraft integration, gas turbine engine performance, inlet design, and aircraft mission analysis. An active member of the SAE, Mr. Williams has authored over 20 technical papers, given invited lectures at major mid-west universities, and has received professional awards and international recognition for his innovative work. He is a recipient of two Henry Ford II Technology Awards, the SAE Industrial Lectureship Award, two SAE Oral Presentation Awards, and the SAE Forest R. McFarland Award. He holds a B.S. in Aeronautical Engineering from the University of Detroit and an M.S. in Aerospace/Mechanical Engineering from the United States Air Force Institute of Technology.

Registration Information
Registration for this live web seminar is available on a per-person basis, similar to purchasing a seat in a classroom. Participants attend an online session from work or home; anywhere with a PC with internet access (at least 56K) and a telephone. The fee includes one connection to the conference calls (toll free telephone number provided for U.S. and select countries*) and assigned personal ID number; one connection to SAE's online training center (via WebEx); and access to a secure course in the SAE Learning Center that contains the presentations, class session recordings, supplemental materials, and assignments.

Registrations will be accepted until 5:00 p.m. the day before the start of the web seminar, but early registration is encouraged to allow for pre-course set-up and instructions.

*Global toll-free telephone numbers are provided for many countries outside the U.S., but are limited to those on the WebEx call-in toll-free number list. Check here to see if your country has a global call-in toll free telephone number for this web seminar. If your country is not listed, you may still connect using the US/Canada Call-in toll number or Voice over Internet Protocol (VoIP).

Although WebEx Training Manager will automatically launch when you join the web seminar, you or your system administrator are encouraged to download the plug-in in advance to help ensure successful setup. Click here, then follow the onscreen instructions.

NOTE: The course presentation will be recorded and made available for 30 days to those who register by the deadline.

Multiple Seat Discount - Does your company have a group of employees who need this course? Register one individual at the appropriate member or list price, then register additional employees at half off the list price. Registration by phone with SAE Customer Service is required to take advantage of this discount. Register all individuals at the same time or mention the confirmation number for the first registrant. The offer is good for only the same web seminar offering. All registrants will receive a personal account and opportunity for CEUs.

Cancellations
Can't attend on the date/time above? The presentation will be recorded and made available for 30 days to those who are registered, regardless of availability for the live session. If you still need to cancel, transfer to a future offering, or designate a substitute, a full refund is issued if you notify SAE at least 14 days prior to the web seminar start date. If less than 14 days prior, please contact SAE Customer Service to discuss options*. NOTE: SAE reserves the right to cancel web seminar and cannot be held responsible for related costs incurred by registrants other than the registration fee.

*Cancellation penalties may apply.

Fees: $855.00 ; SAE Members: $684.00 - $770.00

1.2 CEUs
You must complete all course contact hours and successfully pass the learning assessment to obtain CEUs.

Testimonial
"Course material was well prepared and well executed. ...covers the basics of cooling airflow design together with some more advanced insights into this area."
Peter Gullberg
Technology Specialist
Volvo Group Trucks Technology

"This course gives key-concepts and a big picture of the design process of a vehicle airflow system, in a clear and detailed manner. It's perfect to understand the basics!"
Marc-Olivier Lacerte
Mechanical Engineer
TM4 Electrodynamic Systems

“Jack Williams was an excellent instructor. He has a wealth of experience in all phases of aerodynamics and heat exchanger design. I learned more than I thought I would. This course is a must for engineers working in the area of engine cooling systems.”
Robert W. Cummings P.E.
Consultant
Robert W. Cummings

"This excellent (course) presented the whole picture of vehicle thermal management system with sufficient depth for individual components."
Shiwei Qin
Senior Engineer
Borgwarner Inc.

To register, click Register button at the top of this page and submit the online form, or contact SAE Customer Service at 1-877-606-7323 (724/776-4970 outside the U.S. and Canada) or at CustomerService@sae.org.