Introduction to Design Review Based on Failure Modes (DRBFM) Webinar     

Webinar On-site
Delivery

I.D.# WB1047Printable Description
Duration: 6 Hours
Show Session Dates
November 10-13, 2014 (3 Sessions ) - via telephone/internet
 

Design Review Based on Failure Modes (DRBFM) is a methodology focused on change management and continuous improvement. It centers on early prevention and engineering knowledge, eliminating time spent debating ranking systems, waiting for lead engineers to document and list their concerns, identifying what types of concerns are open for discussion and resolution, and brainstorming without any actionable closure.

This Webinar will explain all phases of the DRBFM methodology and provide details on how to accomplish the specific steps. With the Design Review Based on Failure Modes (DRBFM) and Design Review Based on Test Results (DRBTR) Process Guidebook that is bundled with the course, the instructor will provide specific information on each step. Formats, examples, notes and homework slides will be used to illustrate the defined steps of the new SAE J2886 DRBFM Recommended Practice. Similarities in content between DRBFM and FMEA will be discussed, however the focus will be on conducting DRBFM methodology.

This DRBFM Webinar will provide roles and responsibilities of management, design engineers, manufacturing engineers, facilitators and technical experts. Those interested in DRBFM will benefit from understanding the rationale behind this methodology and learn to guide teams through the paradigm shifts and mind set that are needed.

Learning Objectives
By connecting with this webinar, you will be able to:

  • Outline the fundamental steps of DRBFM methodology, including:
    • DRBFM Plan and analysis requirements
    • Necessary preparation feeding DRBFM analysis
    • The two phases of DRBFM analysis
    • Documentation of design, validation and manufacturing actions
    • Feedback loop into engineering knowledge documents
  • Explain the intent and format of the DRBFM worksheets
  • Predict what it takes to gain and maintain proficiency and consistent application of the methodology
  • Find answers to most DRBFM questions

Who Should Attend
Product engineers, manufacturing engineers, quality engineers, supplier quality engineers, validation and test engineers, and facilitators, trainers and consultants in all industries. This webinar will benefit beginning engineers, advanced and senior engineers and managers who must participate in FMEA's and DRBFM.

Topical Outline
Session 1

  • DRBFM Procedure, Forms, Planning and Preparation
    • Process Guide and Workbook Overview
    • Scope and Purpose
    • Process Map – General Requirements
    • Planning – Formats, examples, homework
    • Planning Results and Output
    • Preparation – Formats, examples, homework
    • Preparation Results and Linkage with DRBFM Format
    • Definition of Change Section
Session 2
  • DRBFM – Forum 1, Design Review, Action Results and Follow Up
    • DRBFM Forum 1 – Engineer analysis
    • Change Point definition
    • Identification of concerns
    • Identification of causes and influences on the vehicle
    • Identification of effects
    • Identification of severity/priority
    • Actions to gain engineering knowledge – evidence
Session 3
  • DRBFM – Forum 2, Design Review, Action Results and Follow Up
    • DRBFM Forum 2 – Design Review introduction
    • Change Point overview
    • Identification of additional concerns
    • Identification of additional causes and influences on the product
    • Identification of effects
    • Identification of severity/priority
    • Actions taken to eliminate concerns
    • Design actions to gain engineering knowledge – evidence
    • Validation actions to gain evidence of reliability
    • Manufacturing, assembly, and supplier actions
    • Action results and feedback to design guidelines
    • Roles and responsibilities

Instructor(s): Bill Haughey
Bill HaugheyBill Haughey is a respected consultant and instructor in the areas of Failure Modes Effects Analysis, Design for Manufacturability and Assembly, Design Review Based on Failure Modes, Design Review Based on Test Results, and other GD3 methodologies. He is a current member of the issuing committee of the SAE J1739 FMEA standard, SAE Automotive Quality and Process Improvement Committee; the SAE Automotive Electronic Systems Reliability Standards Committee; and the AIAG FMEA Fourth Edition Recommended Practice Committee. Mr. Haughey was recently approved to lead the development of a new SAE DRBFM Recommended Practice (J2886). Mr. Haughey formerly worked for GM, where he held various managerial, manufacturing, and engineering positions including Process Lead and Supervisor for FMEA and DFM/A. While at GM, Mr. Haughey also supported Tatsuhiko Yoshimura in the global implementation of the GD3 (DRBFM) methodology. Yoshimura considers Mr. Haughey to be a subject matter expert in the GD3 methodologies, including DRBFM and DRBTR. Mr. Haughey received a B.S. degree from the University of Michigan and M.S from Central Michigan University, and has the following certifications: Black Belt in GD3 (DRBFM and DRBTR); Master Design for Manufacturability and Assembly Engineer; and Certified Internal Auditor.

Registration Information
Registration for this live webinar is available on a per-person basis, similar to purchasing a seat in a classroom. Participants attend an online session from work or home; anywhere with a PC with internet access (at least 56K) and a telephone. The fee includes one connection to the two hour conference call (toll free telephone number provided for U.S. and select countries*) and assigned personal ID number; one connection to SAE's online training center (via WebEx); and access to a secure course in the SAE Learning Center that contains the webinar presentations, class session recordings, supplemental materials, and assignments.

Registrations will be accepted until 5:00 p.m. the day before the start of the webinar, but early registration is encouraged to allow for pre-course set-up and instructions.

*Global toll-free telephone numbers are provided for many countries outside the U.S., but are limited to those on the WebEx call-in toll-free number list. Check here to see if your country has a global call-in toll free telephone number for this webinar. If your country is not listed, you may still connect to this webinar using the US/Canada Call-in toll number or Voice over Internet Protocol (VoIP).

Although WebEx Training Manager will automatically launch when you join the webinar, you or your system administrator are encouraged to download the plug-in in advance to help ensure successful setup. Click here, then follow the onscreen instructions.

NOTE: The course presentation will be recorded and made available for 30 days to those who register by the deadline.

Multiple Seat Discount - Does your company have a group of employees who need this course? Register one individual at the appropriate member or list price, then register additional employees at half off the list price. Registration by phone with SAE Customer Service is required to take advantage of this discount. Register all individuals at the same time or mention the confirmation number for the first registrant. The offer is good for only the same webinar offering. All registrants will receive a personal account and opportunity for CEUs.

Cancellations
Can't attend on the date/time above? The presentation will be recorded and made available for 30 days to those who are registered, regardless of availability for the live session. If you still need to cancel, transfer to a future offering, or designate a substitute, a full refund is issued if you notify SAE at least 14 days prior to the webinar start date. If less than 14 days prior, please contact SAE Customer Service to discuss options*. NOTE: SAE reserves the right to cancel webinars and cannot be held responsible for related costs incurred by registrants other than the registration fee.

*Cancellation penalties may apply.

Fees: $595.00 ; SAE Members: $476.00 - $536.00

.6 CEUs
You must complete all course contact hours and successfully pass the learning assessment to obtain CEUs.

Testimonial
"Learn the DRBFM tools and techniques that can be applied to any business initiatives."
Kenneth Pfiffner
Design Engineer
John Deere

"If you've never dealt with Design Review Based on Failure Modes before, this course gives a great start in learning the DRBFM methodologies."
Jordan Adams
Design Engineer
Tram, Inc.

To register, click Register button at the top of this page and submit the online form, or contact SAE Customer Service at 1-877-606-7323 (724/776-4970 outside the U.S. and Canada) or at CustomerService@sae.org.