Criteria

Text:
Sector:
Category:
Display:

Results

Viewing 1 to 16 of 16
2015-01-14 ...
  • January 14-16, 2015 (2 Sessions) - Live Online
Training / Education Online Web Seminars
In today's economic environment, patents have become an increasingly important asset for both individuals and corporations. More and more, individuals and corporations, including those in the automotive and aerospace industries, are recognizing that revenue can be generated from their patent rights, whether those rights consist of a single patent, a family of patents or an entire portfolio. Indeed, some companies do not make or sell products; their entire revenue is derived from the licensing of their patents. Suffice it to say, licensing revenue has become a significant source of value in the global intellectual property economy.
2015-01-21 ...
  • January 21-23, 2015 (2 Sessions) - Live Online
  • September 29-October 1, 2015 (2 Sessions) - Live Online
Training / Education Online Web Seminars
Today's transportation industries are facing multi-disciplinary challenges. The product design and development process challenges often contradict each other, for example cost, weight, quality and performance. A central challenge is the need for cost and mass reduction to compete in the global market, while continuing to meet all new and existing requirements for quality and performance. Accelerated Concept to Product (ACP) Process is a performance-driven, holistic, product design development method intended to create a balance between structure and strength, synchronizing the individual facets of the product development process.
2015-01-26 ...
  • January 26-February 6, 2015 (6 Sessions) - Live Online
  • August 17-28, 2015 (6 Sessions) - Live Online
Training / Education Online Web Seminars
Design of Experiments (DOE) is a methodology that can be effective for general problem-solving, as well as for improving or optimizing product design and manufacturing processes. Specific applications of DOE include, but are not limited to, identifying root causes to quality or production problems, identifying optimized design and process settings, achieving robust designs, and generating predictive math models that describe physical system behavior.
2015-02-04 ...
  • February 4-20, 2015 (6 Sessions) - Live Online
  • September 16-October 2, 2015 (6 Sessions) - Live Online
Training / Education Online Web Seminars
Failure Modes and Effects Analysis (FMEA) is an integral part of product design activity applicable to any type of product or service. It is a quantitative and quantitative step-by-step approach for identifying and analyzing all actual and potential points of failure in a design, product or service. A successful team-based FMEA activity can use their collective experience with similar products to dramatically improve not only product performance but also reduce manufacturing issues at both a component and system and processing level. This web seminar introduces the five basic types of FMEAs with emphasis on constructing a Design FMEA.
2015-02-16 ...
  • February 16-March 4, 2015 (8 Sessions) - Live Online
  • August 11-September 3, 2015 (8 Sessions) - Live Online
Training / Education Online Web Seminars
Geometric dimensioning and tolerancing (GD&T) is used as a symbolic way of showing specific tolerances on drawings. GD&T is a valuable tool that effectively communicates the design intent to manufacturing and inspection. It is governed by the technical standard ASME Y14.5M-2009. This course introduces participants to the GD&T system, providing a working knowledge of the correct interpretation and application of each symbol, general rules, the datum system, and 'bonus' tolerance and highlighting some of the changes in the updated Y14.5 standard. The material is reinforced with many practice exercises.
2015-02-17 ...
  • February 17-24, 2015 (3 Sessions) - Live Online
  • November 2-6, 2015 (3 Sessions) - Live Online
Training / Education Online Web Seminars
Today's transportation industries are facing multi-disciplinary challenges. The product design and development process challenges often contradict each other, for example cost, weight, quality and performance. A central challenge is the need for cost and mass reduction to compete in the global market, while continuing to meet all new and existing requirements for quality and performance. Accelerated Concept to Product (ACP) Process is a performance-driven, holistic, product design development method intended to create a balance between structure and strength, synchronizing the individual facets of the product development process.
2015-02-27 ...
  • February 27, 2015 (1 Session) - Live Online
  • July 17, 2015 (1 Session) - Live Online
  • December 4, 2015 (1 Session) - Live Online
Training / Education Online Web Seminars
In a global economy, aviation, space and defense organizations are presented the challenge of producing and delivering safe and reliable products across a wide range of customer requirements and expectations. In an effort to address diverse quality requirements and expectations while also reducing costs throughout the supply chain, the AS9100 family of standards was developed by international aerospace industry representatives to standardize international aerospace quality management system requirements. This three-hour web seminar will provide a starting point for participants to gain an overall understanding of AS9100:2009 (Rev. C).
2015-03-09 ...
  • March 9-18, 2015 (5 Sessions) - Live Online
  • September 28-October 7, 2015 (5 Sessions) - Live Online
Training / Education Online Web Seminars
Through the years there has been a significant and increasing volume of fraudulent and counterfeit electronic parts entering the aerospace supply chain. Left undetected, these parts can pose significant performance, reliability, and safety risks. In response to these threats, the SAE AS6081 Counterfeit Electronic Parts Avoidance – Distributors standard was developed to provide uniform requirements, practices, and methods to mitigate the risk of electronics distributors purchasing and supplying these counterfeit electronic parts throughout the aerospace supply chain.
2015-03-16 ...
  • March 16-27, 2015 (6 Sessions) - Live Online
  • September 14-25, 2015 (6 Sessions) - Live Online
Training / Education Online Web Seminars
The Finite Element Analysis (FEA) has been widely implemented by automotive companies and is used by design engineers as a tool during the product development process. Design engineers analyze their own designs while they are still in the form of easily modifiable CAD models to allow for quick turnaround times and to ensure prompt implementation of analysis results in the design process.
2015-04-02 ...
  • April 2, 2015 (1 Session) - Live Online
  • October 20, 2015 (1 Session) - Live Online
Training / Education Online Web Seminars
While the basics of datums are covered in a standard Geometric Dimensioning & Tolerancing (GD&T) course, those discussions often overlook the variations that enable datums to be used in complex ways. This advanced course will detail the proper use of datums, showing their full potential to make your drawings as effective as possible. Most people who use GD&T are familiar with traditional datums derived from flat surfaces, and have adequate knowledge of the principle of establishing 3-2-1 contact points.
2015-04-07 ...
  • April 7, 2015 (1 Session) - Live Online
  • October 22, 2015 (1 Session) - Live Online
Training / Education Online Web Seminars
While the topic of profile is covered in a basic Geometric Dimensioning & Tolerancing (GD&T) course, those discussions often ignore the variations allowed with these symbols that enable them to be used in complex ways. This advanced web seminar will clarify the proper use of the profile tolerances in GD&T and uncover the nuances of these two symbols. Since profile of a surface is arguably the most powerful GD&T symbol, its full potential will be explored. It can be used to control size, form, orientation, and location and its relationship to datums can be varied.
2015-04-09 ...
  • April 9, 2015 (1 Session) - Live Online
  • October 27, 2015 (1 Session) - Live Online
Training / Education Online Web Seminars
While the basics of position are covered in a standard Geometric Dimensioning & Tolerancing (GD&T) course, and sometimes a lone example of composite position is given, those discussions often overlook the variations allowed that enable more accurate control based on part function. This advanced web seminar will clarify the proper use of “double-decker” position controls in GD&T. There are two distinct types: composite position (one symbol) and two single-segment position controls (two symbols). These are commonly used to locate patterns of features (bolt circles, etc.), but they are rarely taught in any depth.
2015-04-28 ...
  • April 28-May 7, 2015 (4 Sessions) - Live Online
  • November 11-20, 2015 (4 Sessions) - Live Online
Training / Education Online Web Seminars
Tough times require searching for things that we can change and making them better. But so often problems are solved with 'band-aids' and not root cause solutions. This approach is getting too expensive and at best only helps companies tread water. To combat these issues and adopt a fresh approach, teams can use the methods and tools of Root Cause Problem Solving to first view problems as opportunities for improvement, identify root causes and implement solutions to prevent recurrence. Benefits include improved quality and customer satisfaction, reduced operation costs, and greater employee knowledge of work processes.
2015-05-11 ...
  • May 11-22, 2015 (6 Sessions) - Live Online
  • October 19-30, 2015 (6 Sessions) - Live Online
Training / Education Online Web Seminars
Finite Element Analysis (FEA) has been used by engineers as a design tool in new product development since the early 1990's. Until recently, most FEA applications have been limited to static analysis due to the cost and complexity of advanced types of analyses. Progress in the commercial FEA software and in computing hardware has now made it practical to use advanced types as an everyday design tool of design engineers. In addition, competitive pressures and quality requirements demand a more in-depth understanding of product behavior under real life loading conditions.
2015-06-02 ...
  • June 2-11, 2015 (4 Sessions) - Live Online
  • December 1-10, 2015 (4 Sessions) - Live Online
Training / Education Online Web Seminars
Analysis of tolerance stacks varies widely. This web seminar introduces the basic tools to create a common methodology for tolerance stack-ups, and ensure seamless documentation. Participants will create 1-D tolerance stacks for parts and assemblies that use geometric dimensioning and tolerancing using a tolerance stack spreadsheet. This simple, manual spreadsheet method produces an easily interpreted and checked documentation trail, and is easily adaptable to common electronic spreadsheet programs. Multiple examples will be provided to assist engineers in applying tolerance stack-up fundamentals to Y14.5 issues.
Training / Education Online Web Seminars
In a global economy, aviation, space and defense organizations are presented the challenge of producing and delivering safe and reliable products across a wide range of customer requirements and expectations. In an effort to address diverse quality requirements and expectations while also reducing costs throughout the supply chain, the AS9100 family of standards was developed by international aerospace industry representatives to standardize international aerospace quality management system requirements.
Viewing 1 to 16 of 16