Criteria

Text:
Category:
Display:

Results

Viewing 1 to 30 of 115
2014-12-02 ...
  • December 2-3, 2014 (8:30 a.m. - 4:30 p.m.) - Troy, Michigan
  • April 20-21, 2015 (8:30 a.m. - 4:30 p.m.) - Detroit, Michigan
  • October 14-15, 2015 (8:30 a.m. - 4:30 p.m.) - Troy, Michigan
Training / Education Classroom Seminars
Attendees to the seminars held in conjunction with the SAE 2015 World Congress will receive COMPLETE access to Congress activities for only $55 per day. If interested, please contact our Customer Service department at +1.877.606.7323 (U.S. and Canada only) or +1.724.776.4970 (outside U.S. and Canada) to register for this special Congress daily rate. An efficient, robust, and quiet running drivetrain is as essential to customer satisfaction as styling and interior creature comforts. In this seminar, you will be exposed to various methods that can be used to accomplish this goal.
2014-12-02 ...
  • December 2-3, 2014 (8:30 a.m. - 4:30 p.m.) - Troy, Michigan
  • April 23-24, 2015 (8:30 a.m. - 4:30 p.m.) - Detroit, Michigan
  • August 19-20, 2015 (8:30 a.m. - 4:30 p.m.) - Rosemont, Illinois
  • November 23-24, 2015 (8:30 a.m. - 4:30 p.m.) - Troy, Michigan
Training / Education Classroom Seminars
Attendees to the seminars held in conjunction with the SAE 2015 World Congress will receive COMPLETE access to Congress activities for only $55 per day. If interested, please contact our Customer Service department at +1.877.606.7323 (U.S. and Canada only) or +1.724.776.4970 (outside U.S. and Canada) to register for this special Congress daily rate. Failure Mode and Effects Analysis (FMEA) is a systematic method for preventing failure through the discovery and mitigation of potential failure modes and their cause mechanisms.
2014-12-04 ...
  • December 4-5, 2014 (8:30 a.m. - 4:30 p.m.) - Troy, Michigan
  • April 9-10, 2015 (8:30 a.m. - 4:30 p.m.) - Troy, Michigan
  • August 27-28, 2015 (8:30 a.m. - 4:30 p.m.) - Troy, Michigan
  • December 1-2, 2015 (8:30 a.m. - 4:30 p.m.) - Troy, Michigan
Training / Education Classroom Seminars
Product development is organizationally a complex undertaking that requires effective coordination within a company and between companies. During product development, teams are confronted with a number of ongoing organizational challenges and there is a high potential for conflict between participants in the process. This course addresses teamwork and other "soft-side" factors that largely determine whether product development programs are successfully completed on schedule. The content is relevant for both OEMs and suppliers.
2014-12-04 ...
  • December 4-5, 2014 (8:30 a.m. - 4:30 p.m.) - Troy, Michigan
  • June 15-16, 2015 (8:30 a.m. - 4:30 p.m.) - Troy, Michigan
  • November 23-24, 2015 (8:30 a.m. - 4:30 p.m.) - Troy, Michigan
Training / Education Classroom Seminars
Car companies and suppliers continue to develop new technologies that make vehicles safer and regulatory agencies continue to update safety regulations based on new research studies, making vehicle safety design more and more complex. This seminar covers the mechanics of frontal crashes and how vehicle structures, vehicle restraint systems, and vehicle interiors affect occupant safety. It also describes details of how CAE tools work in the simulation of frontal crashes. The goal of the course is to familiarize participants with engineering principles behind vehicle and restraint designs for occupant safety.
2014-12-08 ...
  • December 8, 2014 (8:30 a.m. - 4:30 p.m.) - Troy, Michigan
  • April 20, 2015 (8:30 a.m. - 4:30 p.m.) - Detroit, Michigan
  • November 16, 2015 (8:30 a.m. - 4:30 p.m.) - Tysons, Virginia
Training / Education Classroom Seminars
Attendees to the seminars held in conjunction with the SAE 2015 World Congress will receive COMPLETE access to Congress activities for only $55 per day. If interested, please contact our Customer Service department at +1.877.606.7323 (U.S. and Canada only) or +1.724.776.4970 (outside U.S. and Canada) to register for this special Congress daily rate. It is a well-known fact that the number of women in science, engineering and business fields is growing, yet men continue to outnumber women, especially at the upper levels of these professions.
2014-12-10 ...
  • December 10-12, 2014 (8:30 a.m. - 4:30 p.m.) - Troy, Michigan
  • April 22-24, 2015 (8:30 a.m. - 4:30 p.m.) - Detroit, Michigan
  • August 10-12, 2015 (8:30 a.m. - 4:30 p.m.) - Troy, Michigan
  • December 8-10, 2015 (8:30 a.m. - 4:30 p.m.) - Troy, Michigan
Training / Education Classroom Seminars
Attendees to the seminars held in conjunction with the SAE 2015 World Congress will receive COMPLETE access to Congress activities for only $55 per day. If interested, please contact our Customer Service department at +1.877.606.7323 (U.S. and Canada only) or +1.724.776.4970 (outside U.S. and Canada) to register for this special Congress daily rate. In the fast paced and competitive environment of today's global economy, the work of technical professionals is often the difference between success and failure in an organization.
2014-12-11 ...
  • December 11-12, 2014 (8:30 a.m. - 4:30 p.m.) - Troy, Michigan
  • June 22-23, 2015 (8:30 a.m. - 4:30 p.m.) - Troy, Michigan
  • December 7-8, 2015 (8:30 a.m. - 4:30 p.m.) - Troy, Michigan
Training / Education Classroom Seminars
Engineers and managers involved with product development are constantly challenged to reduce time to market, minimize warranty costs, and increase product quality. With less and less time for testing, the need for effective accelerated test procedures has never been greater. This course covers the benefits, limitations, processes, and applications of several proven accelerated test methods including accelerated reliability, step stress, FSLT (Full System Life Test), FMVT® (Failure Mode Verification Testing), HALT (Highly Accelerated Life Testing), and HASS (Highly Accelerated Stress Screening).
2014-12-15 ...
  • December 15-16, 2014 (8:30 a.m. - 4:30 p.m.) - Troy, Michigan
  • April 20-21, 2015 (8:30 a.m. - 4:30 p.m.) - Detroit, Michigan
  • August 3-4, 2015 (8:30 a.m. - 4:30 p.m.) - Troy, Michigan
  • December 14-15, 2015 (8:30 a.m. - 4:30 p.m.) - Troy, Michigan
Training / Education Classroom Seminars
Attendees to the seminars held in conjunction with the SAE 2015 World Congress will receive COMPLETE access to Congress activities for only $55 per day. If interested, please contact our Customer Service department at +1.877.606.7323 (U.S. and Canada only) or +1.724.776.4970 (outside U.S. and Canada) to register for this special Congress daily rate. This seminar introduces participants to all aspects of threaded fasteners including nomenclature, geometric considerations, metallurgy, material properties, applied stresses, and considerations for fatigue, corrosion, brittle fracture and temperature.
2014-12-15 ...
  • December 15-16, 2014 (8:30 a.m. - 4:30 p.m.) - Troy, Michigan
  • March 19-20, 2015 (8:30 a.m. - 4:30 p.m.) - Tysons, Virginia
  • April 20-21, 2015 (8:30 a.m. - 4:30 p.m.) - Detroit, Michigan
  • August 20-21, 2015 (8:30 a.m. - 4:30 p.m.) - Troy, Michigan
  • December 15-16, 2015 (8:30 a.m. - 4:30 p.m.) - Troy, Michigan
Training / Education Classroom Seminars
Attendees to the seminars held in conjunction with the SAE 2015 World Congress will receive COMPLETE access to Congress activities for only $55 per day. If interested, please contact our Customer Service department at +1.877.606.7323 (U.S. and Canada only) or +1.724.776.4970 (outside U.S. and Canada) to register for this special Congress daily rate. Project Management and Advanced Product Quality Planning (APQP) are two critical techniques used in product development in the mobility industry today.
2014-12-15 ...
  • December 15-17, 2014 (8:30 a.m. - 4:30 p.m.) - Troy, Michigan
  • March 30-April 1, 2015 (8:30 a.m. - 4:30 p.m.) - Troy, Michigan
  • August 10-12, 2015 (8:30 a.m. - 4:30 p.m.) - Troy, Michigan
  • December 9-11, 2015 (8:30 a.m. - 4:30 p.m.) - Troy, Michigan
Training / Education Classroom Seminars
RMS (Reliability-Maintainability-Safety-Supportability) engineering is emerging as the newest discipline in product development due to new credible, accurate, quantitative methods. Weibull Analysis is foremost among these new tools. New and advanced Weibull techniques are a significant improvement over the original Weibull approach. This workshop, originally developed by Dr. Bob Abernethy, presents special methods developed for these data problems, such as Weibayes, with actual case studies in addition to the latest techniques in SuperSMITH® Weibull for risk forecasts with renewal and optimal component replacement.
2014-12-17 ...
  • December 17-19, 2014 (8:30 a.m. - 4:30 p.m.) - Troy, Michigan
  • April 22-24, 2015 (8:30 a.m. - 4:30 p.m.) - Detroit, Michigan
  • August 5-7, 2015 (8:30 a.m. - 4:30 p.m.) - Troy, Michigan
  • December 16-18, 2015 (8:30 a.m. - 4:30 p.m.) - Troy, Michigan
Training / Education Classroom Seminars
Attendees to the seminars held in conjunction with the SAE 2015 World Congress will receive COMPLETE access to Congress activities for only $55 per day. If interested, please contact our Customer Service department at +1.877.606.7323 (U.S. and Canada only) or +1.724.776.4970 (outside U.S. and Canada) to register for this special Congress daily rate. There is a potential for metal fatigue in any situation where a component is subjected to cyclic loads. Fatigue failures of various types are a key concern in increasing the reliability of products.
2015-01-28 ...
  • January 28-29, 2015 (8:30 a.m. - 4:30 p.m.) - Norwalk, California
  • August 17-18, 2015 (8:30 a.m. - 1:00 p.m.) - Rosemont, Illinois
Training / Education Classroom Seminars
In the past few decades, product liability law has dramatically changed the manufacturer's outlook in the design and manufacture of product. The concept of safety and reliability has been altered from a purely engineering/manufacturing concept to a legal/manufacturing approach. This new approach requires an understanding of legal concepts as related to the manufacturing and design process. The engineer's role has shifted to include a safety audit analysis to minimize the existence of a product defect and/or to defend the product in a way that is responsive to the legal concerns. An overnight assignment will be made by the instructor.
2015-03-02 ...
  • March 2-4, 2015 (8:30 a.m. - 4:30 p.m.) - Troy, Michigan
  • September 21-23, 2015 (8:30 a.m. - 4:30 p.m.) - Troy, Michigan
Training / Education Classroom Seminars
Public awareness regarding pollutants and their adverse health effects has created an urgent need for engineers to better understand the combustion process as well as the pollutants formed as by-products of that process. To effectively contribute to emission control strategies and design and develop emission control systems and components, a good understanding of the physical and mathematical principles of the combustion process is necessary. This seminar will bring issues related to combustion and emissions "down to earth," relying less on mathematical terms and more on physical explanations and analogies.
2015-03-02 ...
  • March 2-3, 2015 (8:30 a.m. - 4:30 p.m.) - Troy, Michigan
  • September 21-22, 2015 (8:30 a.m. - 4:30 p.m.) - Troy, Michigan
Training / Education Classroom Seminars
In your profession, an educated understanding of internal combustion engines is required, not optional. This two-day technology survey seminar covers the most relevant topics - ranging from the chemistry of combustion to the kinematics of internal components of the modern internal combustion engine - for maximum comprehension. Attendees will gain a practical, hands-on approach to the basics of the most common designs of internal combustion engines, as they apply to the gaseous cycles, thermodynamics and heat transfer to the major components, and the design theories that embody these concepts.
2015-03-03 ...
  • March 3-4, 2015 (8:30 a.m. - 4:30 p.m.) - Troy, Michigan
Training / Education Classroom Seminars
Lubricating fluids are the lifeblood of modern engines, performing numerous vital functions from reducing system friction, temperature, and fuel consumption to minimizing tailpipe emissions. This comprehensive seminar covers the latest developments in lubricating fluids technologies and explores the relationships between lubricating fluids and emissions, after-treatment devices, bio-fuels, and fuel economy. Fundamentals of crankcase lubrication, including the properties and performance requirements of global base stocks and lubricants will be covered.
2015-03-04 ...
  • March 4-6, 2015 (8:30 a.m. - 4:30 p.m.) - Troy, Michigan
  • October 28-30, 2015 (8:30 a.m. - 4:30 p.m.) - Troy, Michigan
Training / Education Classroom Seminars
Societal and regulatory demands to lower emissions and increase engine-operating efficiencies have forced engine designers to adopt new technologies and control strategies. This has resulted in dramatic evolutions of the technology of internal combustion engines and their support systems in recent years. These operational management strategies have evolved into more robust control systems and sensory packages, which in turn has driven the need for more accurate and specific information being communicated between the various systems found within a modern automobile.
2015-03-09 ...
  • March 9-10, 2015 (8:30 a.m. - 4:30 p.m.) - Troy, Michigan
Training / Education Classroom Seminars
Today's necessity for quickly delivering products to market limits product development time and leaves less room for error and 're-dos.' With so many plastic materials available, it is crucial that those involved in product design understand resin properties and how they affect part design and manufacturability. To help you make the best plastic choices the first time, this seminar provides an overview of polymer chemistry, explains the methods for testing properties of plastics and presents a method of systematic selection that will optimize your plastics material selection process.
2015-03-09 ...
  • March 9-10, 2015 (8:30 a.m. - 4:30 p.m.) - Troy, Michigan
  • September 10-11, 2015 (8:30 a.m. - 4:30 p.m.) - Troy, Michigan
Training / Education Classroom Seminars
Design of Experiments (DOE) is a methodology that can be effective for general problem-solving, as well as for improving or optimizing product design and manufacturing processes. Specific applications of DOE include identifying proper design dimensions and tolerances, achieving robust designs, generating predictive math models that describe physical system behavior, and determining ideal manufacturing settings. This seminar utilizes hands-on activities to help you learn the criteria for running a DOE, the requirements and pre-work necessary prior to DOE execution, and how to select the appropriate designed experiment type to run.
2015-03-12 ...
  • March 12-13, 2015 (8:30 a.m. - 4:30 p.m.) - Troy, Michigan
Training / Education Classroom Seminars
Vehicle functional requirements, emission regulations, and thermal limits all have a direct impact on the design of a powertrain cooling airflow system. Given the expected increase in emission-related heat rejection, suppliers and vehicle manufacturers must work together as partners in the design, selection, and packaging of cooling system components. An understanding and appreciation of airflow integration issues and vehicle-level trade-offs that effect system performance are important to the team effort. The severe duty cycles, minimal ram air, and sometimes unconventional package layouts present unique challenges.
2015-03-16 ...
  • March 16-18, 2015 (8:30 a.m. - 4:30 p.m.) - Troy, Michigan
  • July 27-29, 2015 (8:30 a.m. - 4:30 p.m.) - Troy, Michigan
  • November 9-11, 2015 (8:30 a.m. - 4:30 p.m.) - Troy, Michigan
Training / Education Classroom Seminars
The need to control emissions and maintain fuel economy is driving the use of advanced turbocharging technology in both diesel and gasoline engines. As the use of diesel engines in passenger car gasoline and diesel engines increases, a greater focus on advanced turbocharging technology is emerging in an effort to reap the benefits obtained from turbocharging and engine downsizing. This seminar covers the basic concepts of turbocharging of gasoline and diesel engines (light and heavy duty), including turbocharger matching and charge air and EGR cooling, as well as associated controls.
2015-03-17 ...
  • March 17-18, 2015 (8:30 a.m. - 4:30 p.m.) - Tysons, Virginia
Training / Education Classroom Seminars
This seminar provides a functional understanding of the principles involved in conducting a Design for Manufacture/Design for Assembly study. DFM/DFA can support both manual and automated processes resulting in significant cost savings through simpler designs with fewer components. Related topics include workstation layouts, ergonomic considerations and errorproofing. Actual examples from the automotive industry are used to support the lecture and participants complete actual design efficiency using the DFM/DFA worksheet.
2015-03-18 ...
  • March 18-20, 2015 (8:30 a.m. - 4:30 p.m.) - Troy, Michigan
  • June 24-26, 2015 (8:30 a.m. - 4:30 p.m.) - Troy, Michigan
  • November 4-6, 2015 (8:30 a.m. - 4:30 p.m.) - Troy, Michigan
Training / Education Classroom Seminars
As a strategic leader, it is your responsibility to ensure that your organization is moving in the right direction. Executives and high-level managers must have the practical insight necessary to address competitive business challenges. Each segment of this three day course is designed to impart simple, but powerful lessons that will equip participants to more fully engage in strategic discussions, ask pertinent questions, facilitate critical decisions and shape high performing organizations. In addition, the course provides students with a personal leadership profile that illustrates their strengths and potential limitations.
2015-03-23 ...
  • March 23-24, 2015 (8:30 a.m. - 4:30 p.m.) - Troy, Michigan
Training / Education Classroom Seminars
Design and development of a modern steering system influences vehicle response, driver controllability, comfort, safety and fuel economy. In this interactive seminar, participants will analyze the steering system, from the steering wheel to the road wheel. The seminar will cover the anatomy and architecture of the lower steering system (wheel end suspension geometry, linkages and steering gear), its effect on vehicle response, and how a force at the contact patch is translated to a torque in the steering wheel.
2015-03-26 ...
  • March 26-27, 2015 (8:30 a.m. - 4:30 p.m.) - Troy, Michigan
  • August 18-19, 2015 (8:30 a.m. - 4:30 p.m.) - Rosemont, Illinois
Training / Education Classroom Seminars
Meeting the requirements of heavy-duty engine emissions regulations is a challenge for all engine manufacturers. Since the introduction of Exhaust Gas Recirculation (EGR) in medium and heavy-duty diesel engines, these systems have become more sophisticated and tightly integrated with emission control systems. This 2-day seminar will explore the advantages and disadvantages of EGR and the most effective implementation of various EGR systems. This seminar will begin by defining EGR and why it is used in diesel engines, along with an explanation of the mechanisms by which EGR is able to reduce NOx.
2015-03-27 ...
  • March 27, 2015 (8:30 a.m. - 4:30 p.m.) - Tysons, Virginia
  • August 31, 2015 (8:30 a.m. - 4:30 p.m.) - Troy, Michigan
Training / Education Classroom Seminars
This information-packed seminar focuses on the intricacies of patents, patent infringement litigation and patent licensing. Attendees will explore the important subjects of obtaining U.S. and foreign patents, maintaining U.S. and foreign patent rights, enforcing patent rights, defending against patent rights asserted by competitors, and licensing patent rights for revenue. After this seminar, you will effectively understand patents and ways to protect your company's valuable inventions. Your new knowledge will help your company maintain and enhance its position in the marketplace.
2015-03-30 ...
  • March 30-31, 2015 (8:30 a.m. - 4:30 p.m.) - Troy, Michigan
  • October 29-30, 2015 (8:30 a.m. - 4:30 p.m.) - Troy, Michigan
Training / Education Classroom Seminars
Around the world, and more often than not, government bodies require formal certification of products. As product developers expand into new markets, they will be confronted with new standards, regulations, and customer expectations that may require new compliance processes. A properly run compliance program improves your product’s quality and safety, broadens your product’s market, ensures compliance with regulations and laws, and helps provide protection from future product liability issues. This two-day seminar presents a process development methodology that can be used repeatedly as new compliance requirements emerge.
2015-04-01 ...
  • April 1-2, 2015 (8:30 a.m. - 4:30 p.m.) - Troy, Michigan
  • September 17-18, 2015 (8:30 a.m. - 4:30 p.m.) - Troy, Michigan
Training / Education Classroom Seminars
The transportation industry, including motor vehicles, aircraft, rail, marine, commercial, off-road and defense vehicles, as well as infrastructures, energy sectors, raw materials, manufacturing, health and food industries all experience significant issues with corrosion which results in billions of dollars of loss each year. Corrosion education and prevention is essential to improve and increase the service life of parts and components which may have a significant impact on the economy of various industries and nations.
2015-04-09 ...
  • April 9-10, 2015 (8:30 a.m. - 4:30 p.m.) - Troy, Michigan
Training / Education Classroom Seminars
All gasoline powered vehicles and equipment create exhaust and evaporative and refueling emissions. Unlike exhaust emissions, which occur only when the engine is operating, evaporative emissions (evap emissions) occur all the time. Controlling evap emissions to PZEV levels is as challenging as controlling exhaust emissions. It becomes even more important in the case of plug-in hybrid electric vehicles (PHEV) and extended range electric vehicles (EREV) which generate evaporative fuel vapors, but have no place to burn/consume the vapors when the engine does not operate for extended periods of time.
2015-04-13 ...
  • April 13, 2015 (8:30 a.m. - 4:30 p.m.) - Troy, Michigan
  • September 28, 2015 (8:30 a.m. - 4:30 p.m.) - Troy, Michigan
Training / Education Classroom Seminars
The improved efficiencies of the modern diesel engine have led to its increased use within the mobility industry. The vast majority of these diesel engines employ a high-pressure common rail fuel injection system to increase the engine's fuel-saving potential, emissions reduction, and overall performance. This one-day seminar will begin with a review of the basic principles of diesel engines and fuel injection systems. Diesel and alternative fuels will be discussed, followed by current and emerging diesel engine applications.
2015-04-14 ...
  • April 14-15, 2015 (8:30 a.m. - 4:30 p.m.) - Troy, Michigan
  • October 8-9, 2015 (8:30 a.m. - 4:30 p.m.) - Troy, Michigan
Training / Education Classroom Seminars
In today’s highly competitive and liability minded environment, Design Reviews (DR) are a must for all major mobility industries such as Automotive, DOD, Aerospace, Agriculture, Recreation, Marine and Rail. While Design Reviews are becoming increasingly important in product liability litigation, they also serve as an effective way to transfer organizational best practices for specific concerns and issues.
Viewing 1 to 30 of 115