Criteria

Text:
Category:
Display:

Results

Viewing 181 to 210 of 210
Training / Education Classroom Seminars
Part 21 is the FAA regulation that provides the regulatory framework to conduct certification of products and parts. This includes the engineering, airworthiness, production and quality systems. The aerospace industry is hinged around compliance with Part 21; however, comprehension of Part 21 and its role in civil certification is challenging. This course is designed to provide participants with an understanding of the processes that encompass aircraft certification, including compliance with FARs, certification procedures and post certification responsibilities.
Training / Education Classroom Seminars
Fuel composition has had to change with the advent of more stringent emission regulations. Reformulated gasoline (RFG), for example, is vastly different from gasoline of even ten years ago. Tightening regulations on diesel emissions will dramatically change both diesel fuel and engine design. This three-day seminar will review the fundamentals of motor fuels, combustion and motor power generation. The primary content of the course provides a basic introduction to the technology, performance, evaluation, and specifications of current gasoline, diesel, and turbine fuels.
Training / Education Classroom Seminars
The engine control module (ECM, or on-board computer) is the tool used to control the fuel injection rate, fuel injection timing, ignition timing, rate of exhaust gas recirculation (EGR), and other functions. The task of "programming" the ECM is much easier for a race engine than for a production engine because the calibration engineer does not need to be concerned about emissions: EGR, keeping the exhaust catalyst "happy", etc. This course provides a practical introduction to ECMs, including the uses for the various sensors.
Training / Education Classroom Seminars
This seminar is suggested for product or process experts who have a need to utilize more detailed information concerning Design of Experiments analysis. It primarily addresses the subject of ANOVA, analysis of variance, which is a statistically based, objective decision-making tool. This is an advanced seminar that covers the fundamentals required to analyze orthogonal experiments, interpret, and recommend further action based on the analysis. Emphasis is placed on the analysis phase of the DOE process.
Training / Education Classroom Seminars
Based on your test data or process data, do you ever wonder if: An improved product really performs better? A substitute material really processes the same? A cheaper material really performs satisfactorily? What confidence do you have in the final decision that you make? This seminar will help individuals responsible for product or process development and testing to statistically assess the variation of the product or process performance and make effective decisions with confidence.
Training / Education Classroom Seminars
The Automotive Industry is preparing for autonomous vehicle control following the Functional Safety standard ISO 26262. Currently, the industry is experiencing a shortage of engineers in the workplace having the skillset and knowledge-base to implement, test, and verify the newest standard for the autonomous vehicle. LHPU has developed a 6-week Functional Safety boot camp to fill the void with entry level engineers needed for documentation purposes of meeting the ISO 26262 standard. Embedded controls engineers focus their strategies at the system level and their technical know-how to the complex control of the subsystems and components.
Training / Education Classroom Seminars
Every automobile has a differential and most have axles, yet the exact function of these is not common knowledge. This comprehensive seminar introduces participants to the function and interfaces of axles and their individual components. As we modify cars for street performance or all out race applications, it is important to know the trade-offs in the drivetrain system. The theory and practice of axle systems is introduced along with a hands-on style approach to repairing and modifying axles for high performance applications. For this hands-on approach, actual hardware will be reviewed in an informal setting.
Training / Education Classroom Seminars
This course is offered in China only. The course directly addresses improved aircraft system design tools and processes, which, when implemented will significantly contribute to simpler, lower cost and even safer airplanes that meet customer quality demands. Adding value to the high-leveraged area of Design (Reducing design by involving manufacturing) — which is what this course does — can start to reverse the current trend (overrun and long delay) and help Aircraft companies be more profitable. 本课程将直接介绍多种改良飞机系统设计工具与流程,一旦应用可大幅简化设计、降低成本,并提高安全,满足客户的质量要求。通过优化制造以减少设计,从而为设计的高杠杆区域增加价值可以扭转当前设计领域流程冗余繁杂的现状,协助航空公司获得更多利润。这也是本次课程的主要内容。
Training / Education Classroom Seminars
Quality Function Deployment (QFD) is a cross functional, team based methodology recognized as a key technique in improving new product/service design and development. It is especially useful to translate both spoken and unspoken customer needs into a prioritized set of customer product or service characteristics in a language understandable to an organization’s engineering design group. And, by using a cascading approach, it ensures that the design intent is maintained throughout the production planning process and that the design intent is traceable both up and down the product/process planning effort.
Training / Education Classroom Seminars
May 15-19, 2017 July 10-14, 2017 November 6-10, 2017 Mobile Comply 7205 Sterling Ponds Court Sterling Heights, MI Connected Vehicle Professional I - Function, Protocols and Architecture will focus on connected vehicle application concepts and vision, performance functions, communication protocols, hardware architecture components and software architecture methodologies within the connected vehicle ecosystems. To ensure a globally informed awareness, learners will be presented with in-depth wide ranging course materials, suggested domestic and internationally source reading resources, and tested on various key areas of instruction.
Training / Education Classroom Seminars
Embedded controls engineers focus their strategies at the system level and their technical know-how to the complex control of the subsystems and components. Skilled embedded controls engineers proficient in strategy development using Simulink are in high demand in the automotive industry. This intensive, six-week course covers gasoline controls exercises includes the utilization of software technology for rapid controls prototyping.
Training / Education Classroom Seminars
Providing you have an understanding of tolerance stacks, this course teaches an introduction to statistical tolerance stacks, a crucial skill in today’s competitive workplace. Utilizing the expertise of world-renowned GD&T expert Alex Krulikowski, the course includes a brief overview of several terms used in statistical stacks. It explains four methods for applying statistics to tolerance stacks and covers precautions about when and how to use statistics in stacks. Newly acquired learning is reinforced throughout the class with stacks that allow the student to practice applying statistical methods.
Training / Education Classroom Seminars
Providing you have a basic understanding of mechanical drawings, this course teaches how to use engineering drawings that use the International Standards Organization (ISO) standards. Utilizing the expertise of world-renowned GD&T expert Alex Krulikowski, this course will teach you to recognize what is required on a standard-compliant drawing and recognize geometrical tolerances based on the ISO standards. The course combines information from dozens of ISO standards into a logical understandable topic. Newly acquired learning is reinforced throughout the class with more than 150 practice problems.
Training / Education Classroom Seminars
Providing you have a basic understanding of geometric dimensioning and tolerancing fundamentals, this course teaches the significant revisions, additions, and deletions prescribed in the new ASME Y14.5-2009 Standard. Utilizing the expertise of world-renowned GD&T expert Alex Krulikowski, the course offers an in-depth explanation of new features in the 2009 standard and compares them to the 1994 Standard. Newly acquired learning is reinforced throughout the class with numerous practice problems, and a set of comprehensive comparison charts that highlight itemized changes in the standard are included in the workshop price.
Training / Education Classroom Seminars
Around the world, and more often than not, government bodies require formal certification of products. As product developers expand into new markets, they will be confronted with new standards, regulations, and customer expectations that may require new compliance processes. A properly run compliance program improves your product’s quality and safety, broadens your product’s market, ensures compliance with regulations and laws, and helps provide protection from future product liability issues. This two-day seminar presents a process development methodology that can be used repeatedly as new compliance requirements emerge.
Training / Education Classroom Seminars
Engineers are taught to create designs that meet customer specifications. When creating these designs, the focus is usually on the nominal values rather than variation. Robustness refers to creating designs that are insensitive to variability in the inputs. Much of the literature on robustness is dedicated to experimental techniques, particularly Taguchi techniques, which advocate using experiments with replications to estimate variation. This course presents mathematical formulas based on derivatives to determine system variation based on input variation and knowledge of the engineering function.
Training / Education Classroom Seminars
The simultaneous demands for reliability and minimum weight for aircraft and propulsion systems offer some of the most challenging technical problems that structural and safety engineers can encounter. Although much information is available on fracture mechanics and aircraft damage tolerance, this course specifically relates to damage tolerance for gas turbine engines. The need to consider damage tolerance more broadly in new engine designs has just recently been written into FAR 33.70 and new EASA guidelines.
Training / Education Classroom Seminars
Radio Frequency Identification (RFID) is an enabling technology that has been widely adopted in the retail industry. The powers of RFID are acknowledged by many, but a lack of understanding of the technology, its limitations, and how to select the right plan for its target installation has slowed efforts to migrate the technology into the aerospace, space, and transportation industries. While RFID is not a new technology, the rate at which it has been integrated into the aerospace industry has been slow due to unique considerations regarding qualification, regulations, and safety.
Training / Education Classroom Seminars
The planetary gear train is a core component of the automatic transmission system. The ability of the planetary gear train to deliver reliable gains in power, durability, higher torque-to-weight ratios, and configuration flexibility has enabled this gear set to become a key component of the automotive powertrain. A fundamental understanding of planetary gear trains is critical for individuals working in the automotive and industrial transmission fields.
Training / Education Classroom Seminars
A comprehensive and practical understanding of planetary gear trains is critical for individuals involved with the design and development of automatic transmissions. A key component of the automatic transmission system, the planetary gear train is able to deliver reliable gains in power, durability, higher torque-to-weight ratios, and configuration flexibility. This two-day seminar will provide participants an advanced and comprehensive presentation on the topics of planetary gear train design, development, and applications for automatic transmissions.
Training / Education Classroom Seminars
Most muffler design in the automotive industry is accomplished by using "cut-and-try" methods that rely on what has worked in the past and/or extensive full-scale testing on engines for validation. New computer software aimed at muffler design can shorten the design cycle and yield more effective results. This four hour seminar provides an introduction to the behavior of mufflers and silencers including a description of the two-port approach to muffler design. This seminar covers the acoustic simulation of muffler and silencer systems and the use of experimental methods to measure muffler performance.
Training / Education Classroom Seminars
This 4 hour short course offers an overview of aircraft hydraulic pumps focusing on their application in hydraulic systems, design and performance characteristics, and integration issues. These topics will examine the various pump technologies available for aircraft system applications, their design, performance and operational characteristics and limitations, and discuss the challenges and lessons learned in the integration of pumps in hydraulic systems.
Training / Education Classroom Seminars
While most passenger car brake systems are quite robust and reliable under typical operating conditions, high-performance driving and/or racetrack operation generally require alternative design solutions to optimize consistency and longevity. Whether it is brake fluid fade, cracked rotor discs, chronic knockback, or insufficient brake pad life, the stresses of motorsports can pose unique challenges to even the very best brake system designs.
Training / Education Classroom Seminars
Side impact crashes account for approximately twenty-six percent of all motor vehicle fatal crashes, second only to frontal crashes, according to a report by the National Highway Transportation and Safety Administration (NHTSA). While car companies and suppliers continue to develop new technologies that make vehicles safer, NHTSA rolled out updated safety regulations (FMVSS 214) based on new research studies, making vehicle safety design more and more complex. This seminar is designed to familiarize participants with the engineering principles behind vehicle and restraint designs for occupant safety.
Training / Education Classroom Seminars
It is important for electronic and hardware engineers to not only be knowledgeable of a product's intended function and performance, but also its ability to perform within electromagnetic compatibility (EMC) limits. This seminar introduces practical shielding theory, design fundamentals, and configurations, including shielding products, common and differential modes, electromagnetic fields, and enclosure shielding.
Training / Education Classroom Seminars
Lighting Emitting Diode (LED), a new generation semiconductor light source often referred to as Solid-State Lighting (SSL), has been broadly adopted in illumination, display, visualization, and other areas due to its higher efficacy and longer life. LEDs, first introduced for automotive interior applications such as indicators, expanded to exterior applications including center high mounted stop lamps and other automotive signal lighting devices. Today, LED technologies are being used for night vision, occupancy detection, and many other automotive application areas.
Training / Education Classroom Seminars
This seminar is designed to provide gear novices with a general understanding of gear nomenclature, geometry, and arrangements. Starting with the basic definition of gears, conjugate motion and the "Laws of Gearing", you will gain a solid understanding of gearing and the fundamentals of rotary motion transfer through gear-trains. Gear classifications, tooth forms and geometry, and very high-level application considerations, manufacturing processes, and inspection techniques will be covered. Attendees will receive a copy of the book, Gear Design Simplified, by Franklin D. Jones & Henry H. Ryffel.
Training / Education Classroom Seminars
Design of Experiments is a statistically based, structured approach to product or process improvement that will quickly yield significant increases in product quality and subsequent decreases in cost. Products and processes can be designed to function with less variation and with less sensitivity to environmental factors or customer usage. While still maintaining high quality from a customer's viewpoint, products and processes can utilize lower cost materials and methods. Specifications can be opened-up with wider tolerances while still maintaining high quality for customers.
Training / Education Classroom Seminars
This seminar addresses vehicle positioning and navigation systems. The first part of the seminar provides an overview of the Global Positioning System (GPS) since it is the main location technology enabler for automotive location-based applications.
Training / Education Classroom Seminars
The sound package materials for vehicle noise control seminar provides a detail and thorough analysis of three different classes of acoustical materials – namely absorbers, barriers, and dampers, how they are different from each other, and acoustical properties that materials should possess for optimum vehicle noise control. The seminar addresses new advances in acoustical materials, primarily in absorption materials that impact the vehicle acoustics. The seminar covers ways to evaluate the acoustical performance of these materials using different test methods, including material, component, and vehicle level measurements.
Viewing 181 to 210 of 210