Criteria

Text:
Category:
Display:

Results

Viewing 151 to 180 of 203
Training / Education Classroom Seminars
Developing environmentally cleaner and more fuel efficient vehicles is transforming the automotive industry worldwide, particularly in China with its emphasis on new energy vehicles. There are many engineering challenges that must be addressed in designing effective new energy vehicles. The technical knowledge required to understand and make the right decisions with regard to powertrain architecture, powertrain controls, and energy management strategies is critical to success in this market.
Training / Education Classroom Seminars
The advancement of forging technologies and processes has enabled the increased use of forged products to meet the demanding requirements of strength, durability, and reliability. While forgings are commonly used in aerospace manufacturing, the ability to make use of precision forging processes and techniques is critical when manufacturing gas turbine components. Realizing the benefits of accuracy and quality that precision forging brings to product manufacturing requires those involved with design and manufacturing have an understanding of industry accepted technology and processes.
Training / Education Classroom Seminars
One of the main advantages of the precision forging process is the reduction in material consumption due to the achievement of close tolerances and the reduction of machining requirements to meet final component specifications. However, to achieve these results comes at a cost. One of the primary issues with precision forgingis the reduction in life of the tools used in the forming process. Manufacturers can mitigate some of these concerns by better understanding how tools can be designed specifically for the precision forging process and how personnel can effectively apply precision forging techniques.
Training / Education Classroom Seminars
This seminar covers the five types of FMEAs with emphasis on constructing Design and Process FMEAs. Each column of the FMEA document will be clearly explained using an actual FMEA example. The course covers various methods for identifying failure modes, effects and causes with special attention given to severity, occurrence, and detection tables and how to develop effective recommended actions strategies. Throughout the class, participants will be involved in exercises/actual projects that demonstrate and incorporate direct application of learned principles.
Training / Education Classroom Seminars
July 24- 28, 2017 September 11- 15, 2017 November 13-17, 2017 Mobile Comply 7205 Sterling Ponds Court Sterling Heights, MI Connected Vehicle Professional II – Standards, Organizations, Programs, V2X emphasizes connected vehicle standards from various organizations such as SAE, IEEE and other standardization groups. This also exposes learners to multiple organizations and programs recognized throughout the industry. Emphasis for this class is on Vehicle-to-Vehicle (V2V), Vehicle-to-Infrastructure (V2I), Vehicle-to-Data (V2D) technologies.
Training / Education Classroom Seminars
In recent years, rapid developments in the field of new energy vehicles (NEVs) in China have created a need to advance the new energy products currently available. The technology requirements for the NEV market have significantly increased the development of battery systems. This rapid increase in battery development has elevated the importance of optimized battery system design, integration, and validation.
Training / Education Classroom Seminars
Embedded hardware is everywhere you look today from your vehicle’s infotainment system to refrigerator to medical devices and everything else in-between. With so much exposure one would think that such devices are secure against attack; however, sadly for a large number of devices this is not the case. For proof, just look no further than your local news reports. They are full of reports on devices being hacked into. So, as engineers, how do we go about first identifying and mitigating (or capitalizing) the potential security vulnerabilities within these devices?
Training / Education Classroom Seminars
This course is offered in China only. Transmission and driveline products for new energy vehicles are different in many aspects from their counterparts in traditional vehicles. Attendees will have a chance to develop in-depth, practical, hands-on knowledge regarding system configuration, key subsystems and components design, system control, testing, design verification, and so forth. Common problems such as reliability, durability, NVH as well as related technology trends will be addressed from an engineer’s viewpoint. This course offers systematic knowledge to engineers in unprecedented details.
Training / Education Classroom Seminars
Providing you have a basic understanding of Y14.5 Dimensioning and Tolerancing practices, this course explains the major differences between the ASME and ISO standards in a concise, easily understood manner. Utilizing the expertise of world-renowned GD&T expert Alex Krulikowski, the course focuses on how the standards compare when dealing with symbols, feature control frames, tolerances, form controls, datums, and more. Newly acquired learning is reinforced throughout the class with numerous practice problems.
Training / Education Classroom Seminars
Providing you have a basic understanding of Y14.5 Dimensioning and Tolerancing practices, this course explains the fundamental definitions, concepts, and methods from the ASME Y14.41 Standard on Digital Product Definition Data Practices. Utilizing the expertise of world-renowned GD&T expert and former Chairman of the Y14.41 Committee, Alex Krulikowski, the course focuses on understanding the benefits of a math-based product development process. Newly acquired learning is reinforced throughout the class with numerous practice problems.
Training / Education Classroom Seminars
Providing you have an understanding of GD&T fundamentals, this course teaches an introduction to geometric dimensioning and tolerancing and its impact on the manufacturing process. Utilizing the expertise of world-renowned GD&T expert Alex Krulikowski, the course focuses on the basic requirements of engineering drawings, size dimensions, form tolerances, and the datum system, as well as the impact of tolerancing requirements on production. Newly acquired learning is reinforced with numerous practice problems.
Training / Education Classroom Seminars
Providing you have a basic understanding of engineering drawings, this course teaches how to correctly interpret engineering drawings. It will improve a student's understanding of print reading and result in more effective communication on the job. Utilizing the expertise of world-renowned GD&T expert Alex Krulikowski, the course focuses on practical application of print interpretation. It will give you a better understanding of the view representation, dimensions, tolerances, and symbols used on prints. Newly acquired learning is reinforced throughout the class with numerous practice problems.
Training / Education Classroom Seminars
Providing you have a basic understanding of mechanical drawings, this course teaches the terms, rules, symbols, and concepts of GD&T as prescribed in the ASME Y14.5M-1994 Standard. Utilizing the expertise of world-renowned GD&T expert Alex Krulikowski, the course offers an in-depth explanation of geometric symbols, including each symbol's requirements, tolerance zones, and limitations. It also includes a comparison of GD&T to coordinate tolerancing; an explanation of tolerance zones; Rules #1 and #2; form and orientation controls; tolerance of position; runout and profile controls.
Training / Education Classroom Seminars
This one day seminar presents an overview of seals and sealing system design for military and commercial aircraft. It is aimed to provide engineers having some previous actuator and control valve design background with an understanding of the general hardware groove standards, standard parts for static applications and how seal designs and sealing systems can be best used in dynamic reciprocating and rotary applications. Information will be provided regarding seal material and fluid compatibility, friction drag, expected wear rates depending on operating conditions and duty cycle, hardware surface finish and topography.
Training / Education Classroom Seminars
This four-hour short course intends to present an overview of electrically powered flight control actuation systems, covering commercial applications. The scope covers issues related to the mechanical design of actuators themselves, with limited reference to their control electronics. Additionally, this course will provide participants an understanding of the design considerations behind these actuation systems.
Training / Education Classroom Seminars
Providing you have a basic understanding of geometric dimensioning and tolerancing fundamentals, this course teaches an introduction to how to inspect GD&T requirements. Utilizing the expertise of world-renowned GD&T expert Alex Krulikowski, this course offers an explanation of the geometric symbols, rules, and concepts, the datum system, and how to inspect GD&T requirements using tools from the four categories of inspection tools (CMM; comparison instruments and fixed gages; hand tools and open set up; and production gaging systems). Newly acquired learning is reinforced throughout the class with numerous practice problems.
Training / Education Classroom Seminars
Providing you have a basic understanding of geometric dimensioning and tolerancing fundamentals, this course teaches the advanced concepts of GD&T as prescribed in the ASME Y14.5M-1994 Standard. Utilizing the expertise of world-renowned GD&T expert Alex Krulikowski, this course offers an in-depth explanation of advanced GD&T topics like composite tolerancing, tolerance analysis, datum selection, non-rigid part dimensioning, and many more key dimensioning topics, including the system approach for part dimensioning. Newly acquired learning is reinforced throughout the class with more than 150 practice problems.
Training / Education Classroom Seminars
Providing you have a basic understanding of mechanical drawings, this course teaches the terms, rules, symbols, and concepts of GD&T as prescribed in the ASME Y14.5M-1994 Standard. Utilizing the expertise of world-renowned GD&T expert Alex Krulikowski, the course offers an in-depth explanation of geometric symbols, including each symbol's requirements, tolerance zones, and limitations. It also includes a comparison of GD&T to coordinate tolerancing; an explanation of tolerance zones; Rules #1 and #2; form and orientation controls; tolerance of position; runout and profile controls.
Training / Education Classroom Seminars
Providing you have an understanding of GD&T fundamentals, this course teaches the thought processes involved in assigning GD&T to components. It will change the way many engineers think about part tolerancing. Utilizing the expertise of world-renowned GD&T expert Alex Krulikowski, the course focuses on what constitutes good and poor drawing practices, common dimensioning methods used in industry, using GD&T to communicate system functions on component dimensions, and the logic of how to apply GD&T to components.
Training / Education Classroom Seminars
Providing you have a basic understanding of geometric dimensioning and tolerancing fundamentals, this course teaches the advanced concepts of GD&T as prescribed in the ASME Y14.5M-1994 Standard. Utilizing the expertise of world-renowned GD&T expert Alex Krulikowski, this course offers an in-depth explanation of advanced GD&T topics like composite tolerancing, tolerance analysis, datum selection, non-rigid part dimensioning, and many more key dimensioning topics, including the system approach for part dimensioning. Newly acquired learning is reinforced throughout the class with more than 250 practice problems.
Training / Education Classroom Seminars
Providing you have a basic understanding of mechanical drawings, this course teaches the terms, rules, symbols, and concepts of GD&T as prescribed in the ASME Y14.5-2009 Standard. Utilizing the expertise of world-renowned GD&T expert Alex Krulikowski, this course offers an in-depth explanation of geometric tolerancing symbols, their tolerance zones, applicable modifiers, common applications, and limitations. The class includes a comparison of GD&T to coordinate tolerancing; Rules #1 and #2; form and orientation controls; tolerance of position; runout and profile controls.
Training / Education Classroom Seminars
Internet of Things (IoT) analytics extracts important information from the vast amount of data generated by sensors and smart devices. This IoT Analytics course targets the unmet demand for these skills in every industry vertical. This course, presented by LHPU, will help attendees build IoT capabilities from sensor to analytics using the latest devices and technologies available. Attendees will learn about embedded sensor configuration, developing custom visualizations and analytics. Hands-on exercises will be performed through predictive analytics on the telematics data attendees have produced while leveraging the cloud.
Training / Education Classroom Seminars
The automotive industry is the new "battleground" for cybersecurity. Following the path of desktops/laptops, tablets, and mobile phones, the automotive industry is now the "hot" area for both academic researchers and hackers. This will transform the automotive industry just as it transformed traditional information technology and the mobile markets; it is inescapable, but it can be beneficial and a well prepared company can find significant benefit in being a market leader. What does cybersecurity mean? Who is attacking and why? What must we change? What can stay the same? What is the larger organization's role in cyber?
Training / Education Classroom Seminars
This seminar is presented in Mandarin Chinese. The course materials are bilingual (English and Chinese). Developing environmentally cleaner and more fuel efficient vehicles is transforming the automotive industry worldwide, particularly in China with its emphasis on new energy vehicles. There are many engineering challenges that must be addressed in designing effective new energy vehicles. The technical knowledge required to understand and make the right decisions with regard to powertrain architecture, powertrain controls, and energy management strategies is critical to success in this market.
Training / Education Classroom Seminars
SAE International is pleased to offer this professional development seminar in conjunction with the SAE A-6 Aerospace Actuation, Control and Fluid Power Systems Committee meeting Oct. 20-23 Santa Barbara, CA. This 4 hour short course will provide an overview of the hydraulic components used on aircraft. There will be a brief overview of hydraulics, aircraft hydraulic systems, and aircraft flight controls. You will learn the function of each component used within the hydraulic system, and then look in depth at each component’s design.
Training / Education Classroom Seminars
The purpose of this four hour short course is to provide information to understand how is established the basic architecture of a Flight Control Actuation System of a transport airplane, i.e. understanding the rationale for the distribution of the control surfaces, power sources, actuators and computers.
Training / Education Classroom Seminars
Providing you have a basic understanding of mechanical drawings, this course teaches the terms, rules, symbols, and concepts of GD&T as prescribed in the ASME Y14.5-2009 Standard. Utilizing the expertise of world-renowned GD&T expert Alex Krulikowski, this course offers an in-depth explanation of geometric tolerancing symbols, their tolerance zones, applicable modifiers, common applications, and limitations. The class includes a comparison of GD&T to coordinate tolerancing; Rules #1 and #2; form and orientation controls; tolerance of position; runout and profile controls.
Training / Education Classroom Seminars
Providing you have a basic understanding of mechanical drawings, this course teaches the terms, rules, symbols, and concepts of GD&T as prescribed in the ASME Y14.5-2009 Standard. Utilizing the expertise of world-renowned GD&T expert Alex Krulikowski, this course offers an in-depth explanation of geometric tolerancing symbols, their tolerance zones, applicable modifiers, common applications, and limitations. The class includes a comparison of GD&T to coordinate tolerancing; Rules #1 and #2; form and orientation controls; tolerance of position; runout and profile controls.
Training / Education Classroom Seminars
July 24-28, 2017 September 11-15, 2017 November 13-17, 2017 Mobile Comply 7205 Sterling Ponds Court Sterling Heights, MI Connected Vehicle Professional III - Data, Markets, Policy and Regulations focuses on data generated by connected vehicle and data security with an introduction to the development, implementation and regulation of connected cars and other connected vehicle ecosystems. Learners are given in-depth, wide-ranging course materials, suggested reading resources, and are tested on various key areas of instruction.
Training / Education Classroom Seminars
New energy requirements for China’s vehicle market are significantly increasing battery system development. This rapid increase in battery development is elevating the importance of optimized battery system design, integration, and validation. Once the vehicle platform is determined, the vehicle must realize benefits from an optimized battery system design that includes enhanced acceleration speed, stable performance, long life, and desired range.
Viewing 151 to 180 of 203