Criteria

Text:
Category:
Display:

Results

Viewing 31 to 60 of 207
2018-03-12 ...
  • March 12-13, 2018 (8:30 a.m. - 4:30 p.m.) - Warrendale, Pennsylvania
  • June 28-29, 2018 (8:30 a.m. - 4:30 p.m.) - Cleveland, Ohio
  • November 15-16, 2018 (8:30 a.m. - 4:30 p.m.) - Kirkland, Washington
Training / Education Classroom Seminars
The task of certifying an aircraft or part can be overwhelming given the lengthy process and the many steps that are required. Understanding the process can greatly enhance the outcome and reduce unnecessary delays or frustrations. This course will provide an overview of the Federal Aviation Administration (FAA) organizational structure, its policies, guidelines and requirements leading to Type and Supplemental Type airworthiness approvals. It will also cover the rule-making process and rules applicable to aircraft parts and products.
2018-03-13 ...
  • March 13-15, 2018 (8:30 a.m. - 4:30 p.m.) - Livonia, Michigan
  • September 18-20, 2018 (8:30 a.m. - 4:30 p.m.) - Livonia, Michigan
Training / Education Classroom Seminars
Providing you have a basic understanding of mechanical drawings, this course teaches the terms, rules, symbols, and concepts of GD&T as prescribed in the ASME Y14.5M-1994 Standard. Utilizing the expertise of world-renowned GD&T expert Alex Krulikowski, the course offers an in-depth explanation of geometric symbols, including each symbol's requirements, tolerance zones, and limitations. It also includes a comparison of GD&T to coordinate tolerancing; an explanation of tolerance zones; Rules #1 and #2; form and orientation controls; tolerance of position; runout and profile controls.
2018-03-14 ...
  • March 14-16, 2018 (8:30 a.m. - 4:30 p.m.) - Troy, Michigan
  • September 17-19, 2018 (8:30 a.m. - 4:30 p.m.) - Troy, Michigan
Training / Education Classroom Seminars
Design and development of a modern steering system influences vehicle response to steering wheel input, driver effort, comfort, safety and fuel economy. In this interactive seminar participants will analyze the steering system from the road wheel to the steering wheel. Day one will begin with a deep dive into the anatomy and architecture of the lower steering system (wheel end, suspension geometry, linkages and steering gear), its effect on vehicle response and how forces and moments at the contact patch are converted to a torque at the pinion.
2018-03-19 ...
  • March 19-21, 2018 (8:30 a.m. - 4:30 p.m.) - Herndon, Virginia
  • October 17-19, 2018 (8:30 a.m. - 4:30 p.m.) - El Segundo, California
Training / Education Classroom Seminars
Safety continues to be one of the most important factors in motor vehicle design, manufacture and marketing. This seminar provides a comprehensive overview of these critical automotive safety considerations: injury and anatomy; human tolerance and biomechanics; occupant protection; testing; and federal legislation. The knowledge shared at this seminar will enable attendees to be more aware of safety considerations and to better understand and interact with safety experts. This course has been approved by the Accreditation Commission for Traffic Accident Reconstruction (ACTAR) for 18 Continuing Education Units (CEUs).
2018-03-19 ...
  • March 19-21, 2018 (8:30 a.m. - 4:30 p.m.) - Troy, Michigan
  • June 11-13, 2018 (8:30 a.m. - 4:30 p.m.) - Troy, Michigan
  • October 24-26, 2018 (8:30 a.m. - 4:30 p.m.) - Troy, Michigan
Training / Education Classroom Seminars
This interactive seminar will take you beyond the basics of passenger car and light truck vehicle dynamics by applying advanced theory, physical tests and CAE to the assessment of ride, braking, steering and handling performance. Governing state-space equations with transfer functions for primary ride and open loop handling will be developed & analyzed. Building on the analysis of the state space equations, common physical tests and their corresponding CAE solutions for steady state and transient vehicle events will be presented. The "state-of-the-art" of vehicle dynamics CAE will be discussed.
2018-03-19 ...
  • March 19-21, 2018 (8:30 a.m. - 4:30 p.m.) - Troy, Michigan
  • August 6-8, 2018 (8:30 a.m. - 4:30 p.m.) - Troy, Michigan
Training / Education Classroom Seminars
The quest for more efficient, smarter, and environmentally cleaner liquid-fueled spark ignition (SI) reciprocating engines is more alive and intense now than ever before. GDI SI engines have overcome many of the original limitations and are now becoming commonplace. This seminar will provide a comprehensive overview of GDI engines.
2018-03-19 ...
  • March 19-May 4, 2018 (8:00 a.m. - 5:00 p.m.) - Huntington Beach, California
Training / Education Classroom Engineering Academies
Week one venue/dates (Week One) March 19-23, 2018 Kimpton Shorebreak Hotel/Pacific Hideaway 500 Pacific Coast Highway, Huntington Beach, CA 92648   Week two venue/dates (Week Two) May 1 – 4, 2018 Lorien Hotel and Spa 1600 King Street, Alexandria, VA 22314 Many engineering, technical, and business professionals in aerospace companies demonstrate qualities within the first ten years of their careers that identify them as candidates for high level leadership positions.
2018-03-19 ...
  • March 19-23, 2018 (8:00 a.m. - 6:00 p.m.) - Troy, Michigan
Training / Education Classroom Engineering Academies
The Transmission Engineering Academy covers the sciences of automotive passenger car and light truck engineering principles and practices necessary to effectively understand, develop, specify and start the design process. Topics include advances in manual, automatic, automated manual, and continuously variable transmission technology, materials and processes applicable to the major components within these transmissions, calibration of these systems unto themselves and integration into the full vehicle powertrain.
2018-03-20 ...
  • March 20-21, 2018 (8:30 a.m. - 4:30 p.m.) - Livonia, Michigan
Training / Education Classroom Seminars
Providing you have a basic understanding of geometric dimensioning and tolerancing fundamentals, this course teaches the advanced concepts of GD&T as prescribed in the ASME Y14.5M-1994 Standard. Utilizing the expertise of world-renowned GD&T expert Alex Krulikowski, this course offers an in-depth explanation of advanced GD&T topics like composite tolerancing, tolerance analysis, datum selection, non-rigid part dimensioning, and many more key dimensioning topics, including the system approach for part dimensioning. Newly acquired learning is reinforced throughout the class with more than 250 practice problems.
2018-03-21 ...
  • March 21-22, 2018 (8:30 a.m. - 4:30 p.m.) - Durham, North Carolina
  • May 23-24, 2018 (8:30 a.m. - 4:30 p.m.) - Warrendale, Pennsylvania
  • September 10-11, 2018 (8:30 a.m. - 4:30 p.m.) - Warrendale, Pennsylvania
Training / Education Classroom Seminars
The requirements of the AS9120, Rev. B, EN9120B and JIAQ9120B Standards have significantly changed and are based on the NEW ISO9001:2015 Standard. This two-day training program is designed to provide individuals with the knowledge necessary to understand and comprehend the NEW requirements described in AS9120 Rev. B, Quality Management Systems – Requirements for Aviation, Space, and Defense Distributors. The course includes classroom instruction combined with class exercises to further reinforce concepts and definitions now required by the standard.
2018-03-22 ...
  • March 22-23, 2018 (8:30 a.m. - 4:30 p.m.) - Troy, Michigan
Training / Education Classroom Seminars
Lubricating fluids are the lifeblood of modern engines, performing numerous vital functions from reducing system friction, temperature, and fuel consumption to minimizing tailpipe emissions. This comprehensive seminar covers the latest developments in lubricating fluids technologies and explores the relationships between lubricating fluids and emissions, after-treatment devices, bio-fuels, and fuel economy. Fundamentals of crankcase lubrication, including the properties and performance requirements of global base stocks and lubricants will be covered.
2018-03-22 ...
  • March 22, 2018 (8:30 a.m. - 4:30 p.m.) - Troy, Michigan
  • October 18, 2018 (8:30 a.m. - 4:30 p.m.) - Palm Desert, California
Training / Education Classroom Seminars
Brake Noise, Vibration, and Harshness (NVH) is recognized as one of the major problems currently faced by the automotive manufacturers and their suppliers, with customers warranty claims of more than $100 million per year for each manufacturer. With increasing consumer braking performance expectations, automotive OEM’s and suppliers need the ability to predict potential problems and identify solutions during the design phase before millions of dollars have been spent in design, prototyping, and manufacturing tooling.
2018-03-23 ...
  • March 23, 2018 (8:30 a.m. - 4:30 p.m.) - Troy, Michigan
  • October 19, 2018 (8:30 a.m. - 4:30 p.m.) - Palm Desert, California
Training / Education Classroom Seminars
Brake noise is one of the highest ranked complaints of car owners. Grunts, groans, squeaks, and squeals are common descriptions of the annoying problem which brake engineers spend many hours trying to resolve. Consumer expectations and the high cost of warranty repairs are pushing the optimization of brake NVH performance. This course will provide you with an overview of the various damping mechanisms and tools for analyzing and reducing brake noise. A significant component of this course is the inclusion of case studies which will demonstrate how brake noise squeal issues have been successfully resolved.
2018-03-26 ...
  • March 26, 2018 (8:30 a.m. - 4:30 p.m.) - Livonia, Michigan
  • September 12, 2018 (8:30 a.m. - 4:30 p.m.) - Livonia, Michigan
Training / Education Classroom Seminars
It is important for electronic and hardware engineers to not only be knowledgeable of a product's intended function and performance, but also its ability to perform within electromagnetic compatibility (EMC) limits. This seminar introduces practical shielding theory, design fundamentals, and configurations, including shielding products, common and differential modes, electromagnetic fields, and enclosure shielding.
2018-03-26 ...
  • March 26-27, 2018 (8:30 a.m. - 4:30 p.m.) - Troy, Michigan
  • August 9-10, 2018 (8:30 a.m. - 4:30 p.m.) - Greenville, South Carolina
Training / Education Classroom Seminars
Engine failures can occur in a variety of equipment, vehicles, and applications. On occasion, a single vehicle type or equipment family will even experience multiple engine failures leading to the inevitable need to determine what the most likely cause of one or all of those failures was. This comprehensive seminar introduces participants to the methods and techniques used to understand the types of variables and inputs that can affect engine reliability and then determine the most likely cause of an individual engine or group of engine failures in the field.
2018-03-26 ...
  • March 26, 2018 (8:30 a.m. - 4:30 p.m.) - Troy, Michigan
  • September 27, 2018 (8:30 a.m. - 4:30 p.m.) - Troy, Michigan
Training / Education Classroom Seminars
High voltage vehicle safety is a primary concern for every technician or engineer involved in developing, diagnosing or repairing hybrid or electric vehicles. Engineers/technicians working in this field should complete safety training before they interface with hybrid, plug-in or electric vehicles.
2018-03-27 ...
  • March 27-28, 2018 (8:30 a.m. - 4:30 p.m.) - Troy, Michigan
  • October 3-4, 2018 (8:30 a.m. - 4:30 p.m.) - Troy, Michigan
Training / Education Classroom Seminars
As diesel engines become more popular, a fundamental knowledge of diesel technology is critical for anyone involved in the diesel engine support industry. This course will explain the fundamental technology of diesel engines starting with a short but thorough introduction of the diesel combustion cycle, and continue with aspects of engine design, emission control design, and more. An overview of developing technologies for the future with a comprehensive section on exhaust aftertreatment is also included. The text, Diesel Emissions and Their Control, authored by Magdi Khair and W. Addy Majewski is included with the seminar.
2018-03-27 ...
  • March 27-29, 2018 (8:30 a.m. - 4:30 p.m.) - Troy, Michigan
  • September 24-26, 2018 (8:30 a.m. - 4:30 p.m.) - Troy, Michigan
Training / Education Classroom Seminars
Hybrid Electric Vehicle (HEV), Plug-In Hybrid Electric Vehicle (PHEV), and Battery Electric Vehicle (BEV) technology model offerings and production volumes continue to accelerate with each model year. Advanced technology vehicle populations are significantly increasing throughout the world, making it vital for engineers, technicians, and educators to have a thorough understanding of these technologies and systems.
2018-04-02 ...
  • April 2-6, 2018 (8:30 a.m. - 4:30 p.m.) - Pontiac, Michigan
  • May 14-18, 2018 (8:30 a.m. - 4:30 p.m.) - Pontiac, Michigan
  • September 24-28, 2018 (8:30 a.m. - 4:30 p.m.) - Pontiac, Michigan
  • October 15-19, 2018 (8:30 a.m. - 4:30 p.m.) - Pontiac, Michigan
Training / Education Classroom Engineering Academies
Tuning the many electronic variables to ensure that a vehicle's engine performs according to its mission profile ultimately relies upon a competent calibrator. Because proper calibration is a critical aspect of customer satisfaction and emissions certification, skilled calibrators are in high demand in the auto industry. This Academy is designed to provide a foundation for those interested in entering the field of calibration engineering through hands-on exercises and detailed instruction on the base principles of calibration.
2018-04-03 ...
  • April 3, 2018 (8:30 a.m. - 4:30 p.m.) - Troy, Michigan
  • August 30, 2018 (8:30 a.m. - 4:30 p.m.) - Troy, Michigan
  • December 13, 2018 (8:30 a.m. - 4:30 p.m.) - Troy, Michigan
Training / Education Classroom Seminars
This highly interactive workshop focuses training on negotiation strategy and skills. This is not the manipulative, win-lose negotiation approach frequently taught today, where the “winner” eventually spends time and effort protecting his negotiated advantage against erosion, while the “loser” continually exploits loopholes and shortcuts to recover lost ground. Traditional negotiation is a wary dance based on mistrust, the true cost of which is lost in quality and brain fatigue – usually for someone other than the negotiator – over the life of the agreement.
2018-04-04 ...
  • April 4-6, 2018 (8:30 a.m. - 4:30 p.m.) - Troy, Michigan
  • August 27-29, 2018 (8:30 a.m. - 4:30 p.m.) - Troy, Michigan
  • December 10-12, 2018 (8:30 a.m. - 4:30 p.m.) - Troy, Michigan
Training / Education Classroom Seminars
In the fast paced and competitive environment of today's global economy, the work of technical professionals is often the difference between success and failure in an organization. Providing leadership for engineers is uniquely challenging, and the transition from working engineer to first-line technical supervisor is one of the most difficult career challenges that an engineer may face. First-time engineering supervisors and mid-level managers who wish to sharpen their skills and learn new techniques for guiding, coaching, and motivating working engineers, technicians, and designers will find this seminar valuable.
2018-04-06 ...
  • April 6, 2018 (6:00 p.m. - 10:00 p.m.) - Warrendale, Pennsylvania
Training / Education Classroom Seminars
This four hour short course will provide an overview of the airworthiness certification process and the role of the FAA Designated Engineering Representative (DER) and Authorized Representative (AR). This seminar will provide insight into the type design, minor/ major Changes, FAA conformity process, and test witnessing. It also provides familiarity with FAA forms.
2018-04-08 ...
  • April 8, 2018 (8:30 a.m. - 4:30 p.m.) - Detroit, Michigan
  • October 18, 2018 (8:30 a.m. - 4:30 p.m.) - Palm Desert, California
Training / Education Classroom Seminars
The choice of brake friction materials varies per application, but each must have the appropriate coefficient of friction and be able to disperse large amounts of heat without adversely effecting braking performance. This seminar will provide an introduction to brake lining raw materials and formulation, manufacturing, quality control and testing. The course covers the critical elements that must be reviewed before arriving at a lining selection decision. Different classes of friction material and their use will be defined.
2018-04-09 ...
  • April 9-10, 2018 (8:30 a.m. - 4:30 p.m.) - Detroit, Michigan
Training / Education Classroom Seminars
Since the invention of the automobile, lighting has been an important subsystem on all ground vehicles. Automotive lighting is vital to passenger safety, comfort and vehicle styling. The technology used in automotive lighting has rapidly expanded to make the lighting more value added, safer and pleasing to customers. This seminar provides broad information about automotive lighting systems with emphasis on lighting functions, effectiveness, and technologies. The intent is to assist attendees to gain sufficient knowledge about automotive lighting and its importance in overall vehicle design and development.
2018-04-09 ...
  • April 9-10, 2018 (8:30 a.m. - 4:30 p.m.) - Detroit, Michigan
  • August 9-10, 2018 (8:30 a.m. - 4:30 p.m.) - Troy, Michigan
Training / Education Classroom Seminars
Through informative discussions and detailed explanations, this seminar will provide a solid and fundamental understanding of gear geometry, types and arrangements, and design principles. Starting with the basic definitions of gears, conjugate motion, and the Laws of Gearing, those attending will be given the tools needed to understand the inter-relation and coordinated motion operating within gear pairs and multi-gear trains. Basic gear system design process and gear measurement and inspection techniques will also be explained.
2018-04-09 ...
  • April 9-10, 2018 (8:30 a.m. - 4:30 p.m.) - Detroit, Michigan
  • June 18-19, 2018 (8:30 a.m. - 4:30 p.m.) - Troy, Michigan
  • September 27-28, 2018 (8:30 a.m. - 4:30 p.m.) - Troy, Michigan
  • November 28-29, 2018 (8:30 a.m. - 4:30 p.m.) - Troy, Michigan
Training / Education Classroom Seminars
Project Management and Advanced Product Quality Planning (APQP) are two critical techniques used in product development in the mobility industry today. This seminar will bring these techniques together in an easy to understand format that goes beyond the typical concept of constructing timelines and project planning, by exploring not only the Automotive APQP process, but also key aspects of PM processes. Students will gain a solid foundation in the principles and application of Project Management and APQP.
2018-04-09 ...
  • April 9-10, 2018 (8:30 a.m. - 4:30 p.m.) - Detroit, Michigan
  • October 11-12, 2018 (8:30 a.m. - 4:30 p.m.) - Palm Desert, California
Training / Education Classroom Seminars
Once reserved for high-end luxury vehicles, electronic brake control systems are now required standard equipment on even the most inexpensive cars and trucks. Today, every new vehicle benefits from the optimized braking, enhanced acceleration, and improved stability that these systems provide. This comprehensive seminar introduces participants to the system-level design considerations, vehicle interface requirements, and inevitable performance compromises that must be addressed when implementing these technologies. The seminar begins by defining the tire-road interface and analyzing fundamental vehicle dynamics.
2018-04-09 ...
  • April 9-10, 2018 (8:30 a.m. - 4:30 p.m.) - Detroit, Michigan
  • October 9-10, 2018 (8:30 a.m. - 4:30 p.m.) - Troy, Michigan
Training / Education Classroom Seminars
All gasoline powered vehicles and equipment create exhaust and evaporative and refueling emissions. Unlike exhaust emissions, which occur only when the engine is operating, evaporative emissions (evap emissions) occur all the time. Controlling evap emissions to PZEV levels is as challenging as controlling exhaust emissions. It becomes even more important in the case of plug-in hybrid electric vehicles (PHEV) and extended range electric vehicles (EREV) which generate evaporative fuel vapors, but have no place to burn/consume the vapors when the engine does not operate for extended periods of time.
2018-04-09 ...
  • April 9-10, 2018 (8:30 a.m. - 4:30 p.m.) - Detroit, Michigan
  • June 21-22, 2018 (8:30 a.m. - 4:30 p.m.) - Hamburg, Germany
  • October 9-10, 2018 (8:30 a.m. - 4:30 p.m.) - Troy, Michigan
Training / Education Classroom Seminars
Advanced High Strength Steels (AHSS) are now commonly used in automotive body structural applications. The high strength of this grade classification is attractive to help reduce mass in the automotive body through reduction in thickness. Strength also supports improvements in safety requirements so that mass increases are minimized. In some specific grades of AHSS, energy absorption is possible in addition to the high strength. This course will review the definition and properties of AHSS and cover several common applications in automotive body structures.
2018-04-09 ...
  • April 9, 2018 (8:30 a.m. - 4:30 p.m.) - Detroit, Michigan
  • June 15, 2018 (8:30 a.m. - 4:30 p.m.) - Troy, Michigan
  • October 15, 2018 (8:30 a.m. - 4:30 p.m.) - El Segundo, California
Training / Education Classroom Seminars
For automotive engineers involved in crash reconstruction and analysis, a knowledge of basic accident reconstruction principles and techniques is essential, but often insufficient to answer all of the questions posed by design engineers, regulators, and lawyers. This seminar takes participants beyond the basics of accident reconstruction to physical models and analysis techniques that are unique to the reconstruction of single-vehicle rollover crashes.
Viewing 31 to 60 of 207