Criteria

Text:
Category:
Display:

Results

Viewing 1 to 30 of 210
2017-07-25 ...
  • July 25-27, 2017 (8:30 a.m. - 4:30 p.m.) - Toulouse, France
  • August 1-3, 2017 (8:30 a.m. - 4:30 p.m.) - Farmington, Connecticut
  • August 1-3, 2017 (8:30 a.m. - 4:30 p.m.) - Norwalk, California
  • August 7-9, 2017 (8:30 a.m. - 4:30 p.m.) - Tokyo, Japan
  • August 15-17, 2017 (8:30 a.m. - 4:30 p.m.) - Farmington, Connecticut
  • August 22-24, 2017 (8:30 a.m. - 4:30 p.m.) - Troy, Michigan
  • August 22-24, 2017 (8:30 a.m. - 4:30 p.m.) - West Chester, Ohio
  • August 29-31, 2017 (8:30 a.m. - 4:30 p.m.) - Saint-Hubert, Quebec
  • September 5-7, 2017 (8:30 a.m. - 4:30 p.m.) - West Chester, Ohio
  • September 12-14, 2017 (8:30 a.m. - 4:30 p.m.) - Farmington, Connecticut
  • September 12-14, 2017 (8:30 a.m. - 4:30 p.m.) - Hatton Cross, United Kingdom
  • September 12-14, 2017 (8:30 a.m. - 4:30 p.m.) - Norwalk, California
  • September 12-14, 2017 (8:30 a.m. - 4:30 p.m.) - St Pierre du Perray, France
  • September 12-14, 2017 (8:30 a.m. - 4:30 p.m.) - Warrendale, Pennsylvania
  • September 19-21, 2017 (8:30 a.m. - 4:30 p.m.) - Phoenix, Arizona
  • September 19-21, 2017 (8:30 a.m. - 4:30 p.m.) - West Chester, Ohio
  • September 25-27, 2017 (8:30 a.m. - 4:30 p.m.) - Santiago de Quer, Mexico
  • September 26-28, 2017 (8:30 a.m. - 4:30 p.m.) - Farmington, Connecticut
  • October 3-5, 2017 (8:30 a.m. - 4:30 p.m.) - Cardano Al Campo, Italy
  • October 3-5, 2017 (8:30 a.m. - 4:30 p.m.) - Farmington, Connecticut
  • October 3-5, 2017 (8:30 a.m. - 4:30 p.m.) - Norwalk, California
  • October 10-12, 2017 (8:30 a.m. - 4:30 p.m.) - West Chester, Ohio
  • October 10-12, 2017 (8:30 a.m. - 4:30 p.m.) - Wolverhampton, United Kingdom
  • October 17-19, 2017 (8:30 a.m. - 4:30 p.m.) - Farmington, Connecticut
  • October 24-26, 2017 (8:30 a.m. - 4:30 p.m.) - Cleveland, Ohio
  • October 24-26, 2017 (8:30 a.m. - 4:30 p.m.) - Munich, Germany
  • October 24-26, 2017 (8:30 a.m. - 4:30 p.m.) - West Chester, Ohio
  • October 31-November 2, 2017 (8:30 a.m. - 4:30 p.m.) - Indianapolis, Indiana
  • October 31-November 2, 2017 (8:30 a.m. - 4:30 p.m.) - Norwalk, California
  • November 7-9, 2017 (8:30 a.m. - 4:30 p.m.) - Farmington, Connecticut
  • November 7-9, 2017 (8:30 a.m. - 4:30 p.m.) - West Chester, Ohio
  • November 14-16, 2017 (8:30 a.m. - 4:30 p.m.) - Farmington, Connecticut
  • November 14-16, 2017 (8:30 a.m. - 4:30 p.m.) - Miami, Florida
  • November 14-16, 2017 (8:30 a.m. - 4:30 p.m.) - Toulouse, France
  • November 28-30, 2017 (8:30 a.m. - 4:30 p.m.) - Indianapolis, Indiana
  • November 28-30, 2017 (8:30 a.m. - 4:30 p.m.) - Irving, Texas
  • November 28-30, 2017 (8:30 a.m. - 4:30 p.m.) - Tysons, Virginia
  • November 28-30, 2017 (8:30 a.m. - 4:30 p.m.) - West Chester, Ohio
  • December 5-7, 2017 (8:30 a.m. - 4:30 p.m.) - Farmington, Connecticut
  • December 5-7, 2017 (8:30 a.m. - 4:30 p.m.) - Norwalk, California
  • December 12-14, 2017 (8:30 a.m. - 4:30 p.m.) - Farmington, Connecticut
  • December 12-14, 2017 (8:30 a.m. - 4:30 p.m.) - Troy, Michigan
  • December 12-14, 2017 (8:30 a.m. - 4:30 p.m.) - West Chester, Ohio
  • December 19-21, 2017 (8:30 a.m. - 4:30 p.m.) - West Chester, Ohio
Training / Education Classroom Seminars
**Delivery Language is English unless noted above in the 'Delivered In' column.** In the aerospace industry, delegated product release is a process whereby a supplier has been provided the authority to act on behalf of a delegating organization to verify and release products without additional oversight from that delegating organization. Currently, each of these delegating organizations manages and conducts a unique training program for individuals responsible for their product release overcheck process. For suppliers producing products for multiple delegating organizations, each must then manage the multiple training requirements.
2017-07-26 ...
  • July 26-27, 2017 (8:30 a.m. - 4:30 p.m.) - Troy, Michigan
  • November 8-9, 2017 (8:30 a.m. - 4:30 p.m.) - Troy, Michigan
  • December 7-8, 2017 (8:30 a.m. - 4:30 p.m.) - Shanghai, China
Training / Education Classroom Seminars
Every year, the U.S. experiences more than 32,000 traffic deaths and over 3.8 million crash injuries. While the trend in traffic deaths has been downward for the past decade, most of this reduction has been the result of optimizing passive occupant crash protection systems such as seatbelts and airbags. Advanced driver assistance systems (ADAS) now offer the potential to significantly reduce or eliminate most vehicle crashes by perceiving a dangerous situation before the crash has occurred and taking action to avoid or mitigate the crash.
2017-07-26 ...
  • July 26-27, 2017 (8:30 a.m. - 4:30 p.m.) - Troy, Michigan
  • December 4-5, 2017 (8:30 a.m. - 4:30 p.m.) - Puyallup, Washington
Training / Education Classroom Seminars
The requirements for producing an FAA approved replacement part can be daunting. Understanding the steps required in the FAA Parts Manufacturer Approval (PMA) process can greatly streamline the approval life-cycle and reduce unnecessary costs and delays, thereby shortening the time and cost to market. This course is designed for those organizations and individuals interested in designing and manufacturing replacement parts for civil aviation aircraft. This two-day course covers the crucial subjects and steps of the FAA-PMA approval process.
2017-07-28 ...
  • July 28, 2017 (8:30 a.m. - 4:30 p.m.) - Troy, Michigan
  • November 10, 2017 (8:30 a.m. - 4:30 p.m.) - Troy, Michigan
Training / Education Classroom Seminars
Active Safety, Advanced Driver Assistance Systems (ADAS) are now being introduced to the marketplace as they serve as key enablers for anticipated autonomous driving systems. Automatic Emergency Braking (AEB) is one ADAS application which is either in the marketplace presently or under development as nearly all automakers have pledged to offer this technology by the year 2022. This one-day course is designed to provide an overview of the typical ADAS AEB system from multiple perspectives.
2017-08-02 ...
  • August 2-4, 2017 (8:30 a.m. - 4:30 p.m.) - Troy, Michigan
  • November 15-17, 2017 (8:30 a.m. - 4:30 p.m.) - Troy, Michigan
Training / Education Classroom Seminars
In today's corporate environment of shrinking budgets, required structural cost reductions, sharing of global designs/services, and pricing pressures, it is critical that engineers possess a working knowledge of engineering economics principles. To fully understand the economic viability of engineering decisions, engineers need to find the appropriate balance between design alternatives, resulting costs, and impact on their enterprise. This seminar introduces participants to the cost, finance and economic concepts and their applications to products and services.
2017-08-07 ...
  • August 7-9, 2017 (8:30 a.m. - 4:30 p.m.) - Troy, Michigan
  • December 4-6, 2017 (8:30 a.m. - 4:30 p.m.) - Troy, Michigan
Training / Education Classroom Seminars
Starting with a look at the transmission's primary function -- to couple the engine to the driveline and provide torque ratios between the two -- this updated and expanded seminar covers the latest transmission systems designed to achieve the most efficient engine operation. Current designs, the components and sub-systems used, their functional modes, how they operate, and the inter-relationships will be discussed. A manual transmission display will be used to explain ratios and how they function within the driveline.
2017-08-07 ...
  • August 7-9, 2017 (8:30 a.m. - 4:30 p.m.) - Troy, Michigan
  • December 6-8, 2017 (8:30 a.m. - 4:30 p.m.) - Troy, Michigan
Training / Education Classroom Seminars
This seminar will present an introduction to Vehicle Dynamics from a vehicle system perspective. The theory and applications are associated with the interaction and performance balance between the powertrain, brakes, steering, suspensions and wheel and tire vehicle subsystems. The role that vehicle dynamics can and should play in effective automotive chassis development and the information and technology flow from vehicle system to subsystem to piece-part is integrated into the presentation. Governing equations of motion are developed and solved for both steady and transient conditions.
2017-08-10 ...
  • August 10-11, 2017 (8:30 a.m. - 4:30 p.m.) - Troy, Michigan
Training / Education Classroom Seminars
Through informative discussions and detailed explanations, this seminar will provide a solid and fundamental understanding of gear geometry, types and arrangements, and design principles. Starting with the basic definitions of gears, conjugate motion, and the Laws of Gearing, those attending will be given the tools needed to understand the inter-relation and coordinated motion operating within gear pairs and multi-gear trains. Basic gear system design process and gear measurement and inspection techniques will also be explained.
2017-08-14 ...
  • August 14-15, 2017 (8:30 a.m. - 4:30 p.m.) - Troy, Michigan
  • December 7-8, 2017 (8:30 a.m. - 4:30 p.m.) - Troy, Michigan
Training / Education Classroom Seminars
Design of Experiments (DOE) is a methodology that can be effective for general problem-solving, as well as for improving or optimizing product design and manufacturing processes. Specific applications of DOE include identifying proper design dimensions and tolerances, achieving robust designs, generating predictive math models that describe physical system behavior, and determining ideal manufacturing settings. This seminar utilizes hands-on activities to help you learn the criteria for running a DOE, the requirements and pre-work necessary prior to DOE execution, and how to select the appropriate designed experiment type to run.
2017-08-15 ...
  • August 15-16, 2017 (8:30 a.m. - 4:30 p.m.) - Troy, Michigan
Training / Education Classroom Seminars
Stringent requirements of reduced NOx emission limits in the US have presented engineers and technical staff with numerous challenges. Several in-cylinder technical solutions have been developed for diesel engines to meet 2010 emission standards. These technologies have been optimized and have yielded impressive engine-out results in their ability to reduce emissions to extremely low levels. However, current and state-of-the-art in-cylinder solutions have fallen short of achieving the limits imposed on diesel emissions for 2010.
2017-08-16 ...
  • August 16-18, 2017 (8:30 a.m. - 4:30 p.m.) - Troy, Michigan
  • December 13-15, 2017 (8:30 a.m. - 4:30 p.m.) - Troy, Michigan
Training / Education Classroom Seminars
RMS (Reliability-Maintainability-Safety-Supportability) engineering is emerging as the newest discipline in product development due to new credible, accurate, quantitative methods. Weibull Analysis is foremost among these new tools. New and advanced Weibull techniques are a significant improvement over the original Weibull approach. This workshop, originally developed by Dr. Bob Abernethy, presents special methods developed for these data problems, such as Weibayes, with actual case studies in addition to the latest techniques in SuperSMITH® Weibull for risk forecasts with renewal and optimal component replacement.
2017-08-16 ...
  • August 16, 2017 (8:30 a.m. - 4:30 p.m.) - Troy, Michigan
Training / Education Classroom Seminars
The improved efficiencies of the modern diesel engine have led to its increased use within the mobility industry. The vast majority of these diesel engines employ a high-pressure common rail fuel injection system to increase the engine's fuel-saving potential, emissions reduction, and overall performance. This one-day seminar will begin with a review of the basic principles of diesel engines and fuel injection systems. Diesel and alternative fuels will be discussed, followed by current and emerging diesel engine applications.
2017-08-17 ...
  • August 17-18, 2017 (8:30 a.m. - 4:30 p.m.) - Troy, Michigan
Training / Education Classroom Seminars
This seminar provides a functional understanding of the principles involved in conducting a Design for Manufacture/Design for Assembly study. DFM/DFA can support both manual and automated processes resulting in significant cost savings through simpler designs with fewer components. Related topics include workstation layouts, ergonomic considerations and errorproofing. Actual examples from the automotive industry are used to support the lecture and participants complete actual design efficiency using the DFM/DFA worksheet.
2017-08-21 ...
  • August 21-22, 2017 (8:30 a.m. - 4:30 p.m.) - Troy, Michigan
  • December 4-5, 2017 (8:30 a.m. - 4:30 p.m.) - Troy, Michigan
Training / Education Classroom Seminars
The design and development of vehicle suspensions significantly influences vehicle handling and ride comfort. Suspension system design excellence follows the basic laws of physics using design synthesis techniques, a methodical process for suspension geometry development. Suspension geometry is the foundation of vehicle performance from which high-confidence suspension components and tunings can be developed. Suspension component design continues to move toward mass and cost efficient designs with high levels of stiffness being essential to achieving design requirements.
2017-08-22 ...
  • August 22-23, 2017 (8:30 a.m. - 4:30 p.m.) - Tysons, Virginia
  • December 12-13, 2017 (8:30 a.m. - 4:30 p.m.) - Puyallup, Washington
Training / Education Classroom Seminars
Individuals responsible for quality management system, implementation, and transition to the AS9100:2016 series of standards for Aviation, Space, and Defense will require an understanding of the requirements for the preparation and execution of the audit process as defined in these revised standards. Management and implementers of AS9100:2016 Rev. D within these organizations must also be aware of what these changes may mean for their company.
2017-08-28 ...
  • August 28-30, 2017 (8:30 a.m. - 4:30 p.m.) - Troy, Michigan
  • December 11-13, 2017 (8:30 a.m. - 4:30 p.m.) - Troy, Michigan
Training / Education Classroom Seminars
In the fast paced and competitive environment of today's global economy, the work of technical professionals is often the difference between success and failure in an organization. Providing leadership for engineers is uniquely challenging, and the transition from working engineer to first-line technical supervisor is one of the most difficult career challenges that an engineer may face. First-time engineering supervisors and mid-level managers who wish to sharpen their skills and learn new techniques for guiding, coaching, and motivating working engineers, technicians, and designers will find this seminar valuable.
2017-08-29 ...
  • August 29-30, 2017 (8:30 a.m. - 4:30 p.m.) - Livonia, Michigan
Training / Education Classroom Seminars
Providing you have a basic understanding of mechanical drawings, this course teaches the terms, rules, symbols, and concepts of GD&T as prescribed in the ASME Y14.5M-1994 Standard. Utilizing the expertise of world-renowned GD&T expert Alex Krulikowski, the course offers an in-depth explanation of geometric symbols, including each symbol's requirements, tolerance zones, and limitations. It also includes a comparison of GD&T to coordinate tolerancing; an explanation of tolerance zones; Rules #1 and #2; form and orientation controls; tolerance of position; runout and profile controls.
2017-08-31 ...
  • August 31, 2017 (8:30 a.m. - 4:30 p.m.) - Troy, Michigan
  • December 14, 2017 (8:30 a.m. - 4:30 p.m.) - Troy, Michigan
Training / Education Classroom Seminars
This highly interactive workshop focuses training on negotiation strategy and skills. This is not the manipulative, win-lose negotiation approach frequently taught today, where the “winner” eventually spends time and effort protecting his negotiated advantage against erosion, while the “loser” continually exploits loopholes and shortcuts to recover lost ground. Traditional negotiation is a wary dance based on mistrust, the true cost of which is lost in quality and brain fatigue – usually for someone other than the negotiator – over the life of the agreement.
2017-09-07 ...
  • September 7-8, 2017 (8:30 a.m. - 4:30 p.m.) - Troy, Michigan
Training / Education Classroom Seminars
Note: Last day of class ends at approximately 1:00 pm According to the Federal Rules of Evidence, an expert witness is anyone who can assist the trier of fact (the jury) in understanding any issue in dispute at trial. The witness' ability to give this assistance can be derived from any specialized training, education, background, or experience. To be effective in providing this assistance, however, requires that the expert witness understand the true role that he or she is to play both before and at the trial.
2017-09-11 ...
  • September 11-13, 2017 (8:30 a.m. - 4:30 p.m.) - Troy, Michigan
Training / Education Classroom Seminars
The quest for more efficient, smarter, and environmentally cleaner liquid-fueled spark ignition (SI) reciprocating engines is more alive and intense now than ever before. GDI SI engines have overcome many of the original limitations and are now becoming commonplace. This seminar will provide a comprehensive overview of GDI engines.
2017-09-11 ...
  • September 11-12, 2017 (8:30 a.m. - 4:30 p.m.) - Troy, Michigan
Training / Education Classroom Seminars
Meeting the requirements of heavy-duty engine emissions regulations is a challenge for all engine manufacturers. Since the introduction of Exhaust Gas Recirculation (EGR) in medium and heavy-duty diesel engines, these systems have become more sophisticated and tightly integrated with emission control systems. This 2-day seminar will explore the advantages and disadvantages of EGR and the most effective implementation of various EGR systems. This seminar will begin by defining EGR and why it is used in diesel engines, along with an explanation of the mechanisms by which EGR is able to reduce NOx.
2017-09-13 ...
  • September 13-15, 2017 (8:30 a.m. - 4:03 p.m.) - Troy, Michigan
Training / Education Classroom Seminars
Hybrid Electric Vehicle (HEV), Plug-In Hybrid Electric Vehicle (PHEV), and Battery Electric Vehicle (BEV) technology model offerings and production volumes continue to accelerate with each model year. Advanced technology vehicle populations are significantly increasing throughout the world, making it vital for engineers, technicians, and educators to have a thorough understanding of these technologies and systems.
2017-09-14 ...
  • September 14-15, 2017 (8:30 a.m. - 4:30 p.m.) - Shanghai, China
Training / Education Classroom Seminars
Driven by high fuel prices, environmental regulations, and consumer demand, the market for hybrid electric vehicles (HEV) has experienced rapid growth. Every major automotive company produces an HEV. There are approximately fifty different HEV models on the market and over eight million HEVs already sold. In order to meet current and future demands in the HEV and PHEV markets, success will depend on engineering personnel knowing how to develop and manufacture HEV powertrains. This two day seminar will cover the fundamentals of HEV powertrain design.
2017-09-14 ...
  • September 14-15, 2017 (8:30 a.m. - 4:30 p.m.) - Troy, Michigan
Training / Education Classroom Seminars
The advent of digital computers and the availability of ever cheaper and faster micro processors have brought a tremendous amount of control system applications to the automotive industry in the last two decades. From engine and transmission systems, to virtually all chassis subsystems (brakes, suspensions, and steering), some level of computer control is present. Control systems theory is also being applied to comfort systems such as climate control and safety systems such as cruise control or collision mitigation systems.
2017-09-18 ...
  • September 18-20, 2017 (8:30 a.m. - 4:30 p.m.) - Troy, Michigan
Training / Education Classroom Seminars
Design and development of a modern steering system influences vehicle response to steering wheel input, driver effort, comfort, safety and fuel economy. In this interactive seminar participants will analyze the steering system from the road wheel to the steering wheel. Day one will begin with a deep dive into the anatomy and architecture of the lower steering system (wheel end, suspension geometry, linkages and steering gear), its effect on vehicle response and how forces and moments at the contact patch are converted to a torque at the pinion.
2017-09-19 ...
  • September 19-20, 2017 (8:30 a.m. - 4:30 p.m.) - Shanghai, China
Training / Education Classroom Seminars
课程概述 Powertrain controls for NEVs is one of the most complex and highly confidential areas of NEV research and development. This two-day course takes the seemingly complicated field of NEV powertrain controls and summarizes it into a few basic principles. The latest and most popular NEV powertrains are also reviewed to illustrate these principles and the controls strategies used. 对于新能源汽车来说,动力总成控制一直以来都是最复杂的和高度机密的领域之一。在这两天的课程中,我们将把看似复杂的动力总成控制系统总结出几条基本规则,同时,通过对当今其他车型动力控制系统的案例分析,来把这些规则和原理进行融会贯通。
2017-09-19 ...
  • September 19-20, 2017 (8:30 a.m. - 4:30 p.m.) - Shanghai, China
  • November 14-15, 2017 (8:30 a.m. - 4:30 p.m.) - Livonia, Michigan
Training / Education Classroom Seminars
This two-day interactive course, based on the ASME Y14.5-2009 standard, provides an in-depth explanation of how to use tolerance stacks to analyze product designs and how to use geometric tolerances in stacks. You will learn the essential methods and concepts used for creating 1D part and assembly tolerance stacks. The course was developed utilizing the expertise of world-renowned GD&T expert Alex Krulikowski and features numerous practice problems and in-depth coverage of tolerance stacks applications.
2017-09-21 ...
  • September 21-22, 2017 (8:30 a.m. - 4:30 p.m.) - Troy, Michigan
Training / Education Classroom Seminars
Engineers and managers involved with product development are constantly challenged to reduce time to market, minimize warranty costs, and increase product quality. With less and less time for testing, the need for effective accelerated test procedures has never been greater. This course covers the benefits, limitations, processes, and applications of several proven accelerated test methods including accelerated reliability, step stress, FSLT (Full System Life Test), FMVT® (Failure Mode Verification Testing), HALT (Highly Accelerated Life Testing), and HASS (Highly Accelerated Stress Screening).
2017-09-21 ...
  • September 21, 2017 (8:30 a.m. - 4:30 p.m.) - Troy, Michigan
Training / Education Classroom Seminars
Brake Noise, Vibration, and Harshness (NVH) is recognized as one of the major problems currently faced by the automotive manufacturers and their suppliers, with customers warranty claims of more than $100 million per year for each manufacturer. With increasing consumer braking performance expectations, automotive OEM’s and suppliers need the ability to predict potential problems and identify solutions during the design phase before millions of dollars have been spent in design, prototyping, and manufacturing tooling.
2017-09-21 ...
  • September 21-22, 2017 (8:30 a.m. - 4:30 p.m.) - Troy, Michigan
Training / Education Classroom Seminars
Engine failures can occur in a variety of equipment, vehicles, and applications. On occasion, a single vehicle type or equipment family will even experience multiple engine failures leading to the inevitable need to determine what the most likely cause of one or all of those failures was. This comprehensive seminar introduces participants to the methods and techniques used to understand the types of variables and inputs that can affect engine reliability and then determine the most likely cause of an individual engine or group of engine failures in the field.
Viewing 1 to 30 of 210