Criteria

Text:
Sector:
Display:

Results

Viewing 1 to 30 of 267
2015-10-27 ...
  • October 27, 2015 (8:30 a.m. - 4:30 p.m.) - Troy, Michigan
Training / Education Classroom Seminars
This seminar is designed to provide gear novices with a general understanding of gear nomenclature, geometry, and arrangements. Starting with the basic definition of gears, conjugate motion and the "Laws of Gearing", you will gain a solid understanding of gearing and the fundamentals of rotary motion transfer through gear-trains. Gear classifications, tooth forms and geometry, and very high-level application considerations, manufacturing processes, and inspection techniques will be covered. Attendees will receive a copy of the book, Gear Design Simplified, by Franklin D. Jones & Henry H. Ryffel.
2015-10-08 ...
  • October 8, 2015 (8:30 a.m. - 4:30 p.m.) - Charleston, South Carolina
Training / Education Classroom Seminars
The choice of brake friction materials varies per application, but each must have the appropriate coefficient of friction and be able to disperse large amounts of heat without adversely effecting braking performance. This seminar will provide an introduction to brake lining raw materials and formulation, manufacturing, quality control and testing. The course covers the critical elements that must be reviewed before arriving at a lining selection decision. Different classes of friction material and their use will be defined.
2015-09-24 ...
  • September 24-25, 2015 (8:30 a.m. - 4:30 p.m.) - Troy, Michigan
Training / Education Classroom Seminars
Rapid advances have been made in the range of available designs and operational parameters as well as in the fundamental understanding of compact heat exchangers (CHEs). Since the majority of modern heat exchangers used for heating and cooling systems for vehicular applications are CHEs, keeping up to date with these advances is essential. This seminar will help you understand and be able to apply comprehensive information about the intricacies of CHE design, performance, operating problems and state-of-the-art-technology for car and truck applications.
2015-09-17 ...
  • September 17-18, 2015 (8:30 a.m. - 4:30 p.m.) - Troy, Michigan
Training / Education Classroom Seminars
Side impact crashes account for approximately twenty-six percent of all motor vehicle fatal crashes, second only to frontal crashes, according to a report by the National Highway Transportation and Safety Administration (NHTSA). While car companies and suppliers continue to develop new technologies that make vehicles safer, NHTSA rolled out updated safety regulations (FMVSS 214) based on new research studies, making vehicle safety design more and more complex. This seminar is designed to familiarize participants with the engineering principles behind vehicle and restraint designs for occupant safety.
2015-09-14 ...
  • September 14, 2015 (8:30 a.m. - 4:30 p.m.) - Indianapolis, Indiana
Training / Education Classroom Seminars
Note: Attendees of the Professional Development Seminar that is being held in conjunction with the SAE 2014 On-Board Diagnostics Symposium are able to attend the Symposium at a 10% discount (which is over and above any member level discount). If interested, please contact our Customer Service department at +1.877.606.7323 (U.S. and Canada only) or +1.724.776.4970 (outside U.S. and Canada) to register for this special event daily rate. On-board diagnostics, required by governmental regulations, provide a means for reducing harmful pollutants into the environment.
2015-09-10 ...
  • September 10-11, 2015 (8:30 a.m. - 4:30 p.m.) - Troy, Michigan
Training / Education Classroom Seminars
The Controller Area Network has become the standard of choice for most automotive manufacturers. Approved for use as an ISO and EPA diagnostic network, its usage continues to grow. This seminar covers the theory and use of the CAN protocol, and its applications in the automotive industry. Details on how the CAN protocol and other standards (J2411, J2284, J1939, ISO 11898, etc.) complement each other will be presented. Attendees will learn about CAN application layers; the latest J1939, J2284, J2411, and IDB standards, regulations, and implementation requirements; and details of device hardware and software interfaces.
2015-09-09 ...
  • September 9-10, 2015 (8:30 a.m. - 4:30 p.m.) - Troy, Michigan
Training / Education Classroom Seminars
Understanding the U.S. Department of Defense (DoD) requirements, processes, and product development lifecycle allows for more effective new product engineering and development within the DoD marketplace. In addition, understanding how industry can apply currently available commercial vehicle technologies as a platform to meet current and future DoD needs may become an important factor in reducing costs and conforming to DoD budget constraints. The overall objective of this two day seminar is to establish a working knowledge of the military tactical vehicle product development process.
2015-08-24 ...
  • August 24-25, 2015 (8:30 a.m. - 4:30 p.m.) - Troy, Michigan
Training / Education Classroom Seminars
Improved understanding and control of ignition and thereby combustion are critical in dealing with the problems of pollutants formation, engine performance, and fuel economy. This seminar will provide you with basic knowledge and recent advances in combustion-initiation (ignition) issues to more intelligently evaluate and harness their potentials. Thermodynamic and fluid mechanical properties of the unburned charge near the spark plug and at the time of ignition strongly affect the quality of the combustion and therefore the emission of the pollutants from the engine. Furthermore, a weak ignition limits engine performance and drivability.
2015-08-18 ...
  • August 18-19, 2015 (8:30 a.m. - 4:30 p.m.) - Troy, Michigan
  • November 2-3, 2015 (8:30 a.m. - 4:30 p.m.) - Troy, Michigan
Training / Education Classroom Seminars
Improving vehicular fuel efficiency is of paramount importance to the global economy. Governmental regulations, climate change and associated health concerns, as well as the drive towards energy independence, have created a technical need to achieve greater fuel efficiency. While vehicle manufacturers are focusing efforts on improved combustion strategies, smaller displacement engines, weight reduction, low friction surfaces, etc., the research involved in developing fuel efficient engine oils has been less publicized.
2015-08-10 ...
  • August 10-11, 2015 (8:30 a.m. - 4:30 p.m.) - Troy, Michigan
Training / Education Classroom Seminars
Plastic - any class of synthetically-produced organic compounds capable of being molded and hardened into a specific shape or form. This course is designed to offer a basic understanding of plastics and plastic processing. Using plastics can be simple, but there is much more behind producing high performance plastic parts. This seminar will walk you through the molding process, provide a comprehensive look at the variables in the manufacturing mix, and review characteristics of typical automotive plastics such as PP, PVC, ABS, and more.
2015-08-06 ...
  • August 6, 2015 (8:30 a.m. - 4:30 p.m.) - Tysons, Virginia
Training / Education Classroom Seminars
Design reviews are required for ISO 9001:2000 compliance and compatible automotive and aerospace specifications. They are becoming increasingly important in product liability litigation and are accepted as a cost-effective best practice and an effective application of knowledge management, valuable for accelerating the maturity of new products. This seminar describes how formal design reviews can improve products by uncovering potential problems before they are discovered at a later stage of development or application, when the costs of correction are much higher.
2015-08-04 ...
  • August 4-6, 2015 (2 Sessions) - Live Online
Training / Education Online Web Seminars
This web seminar provides an in-depth overview of diesel engine noise including combustion and mechanical noise sources. In addition, the instructor will discuss a system approach to automotive integration including combining sub-systems and components to achieve overall vehicle noise and vibration goals.
2015-07-27 ...
  • July 27-28, 2015 (8:30 a.m. - 4:31 p.m.) - Warrendale, Pennsylvania
Training / Education Classroom Seminars
Design for Manufacturing and Assembly (DFM+A), pioneered by Boothroyd and Dewhurst, has been used by many companies around the world to develop creative product designs that use optimal manufacturing and assembly processes. Correctly applied, DFM+A analysis leads to significant reductions in production cost, without compromising product time-to-market goals, functionality, quality, serviceability, or other attributes. In this two-day seminar, you will not only learn the Boothroyd Dewhurst Method, you will actually apply it to your own product design!
2015-07-20 ...
  • July 20-21, 2015 (8:30 a.m. - 4:30 p.m.) - Troy, Michigan
Training / Education Classroom Seminars
The purpose of this course is to provide an overview of the factors in the cylinder kit assembly of natural gas, gasoline, and diesel engines that affect oil consumption, ring and cylinder bore wear, and blow-by. This course includes background and the evolution of designs and materials currently employed in modern engines as well as providing an overview of computer models, designs, and material systems that can be utilized to optimize the performance of new engines. An overview of the trends in materials and designs employed in U.S., European and Japanese engines will be presented.
2015-07-20 ...
  • July 20-21, 2015 (8:30 a.m. - 4:30 p.m.) - Troy, Michigan
Training / Education Classroom Seminars
According to the Federal Rules of Evidence, an expert witness is anyone who can assist the trier of fact (the jury) in understanding any issue in dispute at trial. The witness' ability to give this assistance can be derived from any specialized training, education, background, or experience. To be effective in providing this assistance, however, requires that the expert witness understand the true role that he or she is to play both before and at the trial.
2015-06-26 ...
  • June 26, 2015 (12:30 p.m. - 4:30 p.m.) - Grand Rapids, Michigan
Training / Education Classroom Seminars
Most muffler design in the automotive industry is accomplished by using "cut-and-try" methods that rely on what has worked in the past and/or extensive full-scale testing on engines for validation. New computer software aimed at muffler design can shorten the design cycle and yield more effective results. This four hour seminar provides an introduction to the behavior of mufflers and silencers including a description of the two-port approach to muffler design. This seminar covers the acoustic simulation of muffler and silencer systems and the use of experimental methods to measure muffler performance.
2015-06-26 ...
  • June 26, 2015 (8:30 a.m. - 4:30 p.m.) - Grand Rapids, Michigan
  • October 9, 2015 (8:30 a.m. - 4:30 p.m.) - Charleston, South Carolina
Training / Education Classroom Seminars
Brake noise is one of the highest ranked complaints of car owners. Grunts, groans, squeaks, and squeals are common descriptions of the annoying problem which brake engineers spend many hours trying to resolve. Consumer expectations and the high cost of warranty repairs are pushing the optimization of brake NVH performance. This course will provide you with an overview of the various damping mechanisms and tools for analyzing and reducing brake noise. A significant component of this course is the inclusion of case studies which will demonstrate how brake noise squeal issues have been successfully resolved.
2015-06-26 ...
  • June 26, 2015 (8:30 a.m. - 4:30 p.m.) - Grand Rapids, Michigan
Training / Education Classroom Seminars
The influx of different hybrid and electric vehicle configurations has brought about unique NVH challenges from a variety of sources. NVH refinement is an important aspect of powertrain development and the vehicle integration process. While developing the NVH behavior of the vehicle is critical to satisfy customer expectations, it is also important to consider the influence of reduced exterior noise levels on pedestrian safety.
2015-06-25 ...
  • June 25-26, 2015 (8:30 a.m. - 4:30 p.m.) - Grand Rapids, Michigan
Training / Education Classroom Seminars
***Please note: The Thursday, June 25, 2015 seminar class time is 10:30am - 6:00pm. The sound package materials for vehicle noise control seminar provides a detail and thorough analysis of three different classes of acoustical materials – namely absorbers, barriers, and dampers, how they are different from each other, and acoustical properties that materials should possess for optimum vehicle noise control. The seminar addresses new advances in acoustical materials, primarily in absorption materials that impact the vehicle acoustics.
2015-06-17 ...
  • June 17-19, 2015 (8:30 a.m. - 12:30 p.m.) - Troy, Michigan
Training / Education Classroom Seminars
Note: Last day of class ends at approximately 12:30 pm Electric and hybrid vehicles are still relatively new products and are undergoing developmental refinements as the technology moves towards maturity. There are challenges related to the fundamentals of the technologies, the availability of various materials and sub-systems, cost targets and customer demands. The technology is complex and multi-disciplinary involving system integration of diverse components. This course will cover the interdisciplinary aspects of electric and hybrid vehicles where engineers of various disciplines have to work together to develop the system.
2015-06-16 ...
  • June 16, 2015 (8:30 a.m. - 4:30 p.m.) - Troy, Michigan
Training / Education Classroom Seminars
One of the most important safety critical components on cars, trucks, and aircraft is the pneumatic tire. Vehicle tires primarily control stopping distances on wet and dry roads or runways and strongly influence over-steer/under-steer behavior in handling maneuvers of cars and trucks. The inflated tire-wheel assembly also acts as a pressure vessel that releases a large amount of energy when catastrophically deflated. The tire can also serve as a fulcrum, both directly and indirectly, in contributing to vehicle rollover. This seminar covers these facets of tire safety phenomena.
2015-06-15 ...
  • June 15-17, 2015 (8:30 a.m. - 4:30 p.m.) - Troy, Michigan
Training / Education Classroom Seminars
Liquid fuel atomization and spray formation is the heart of the majority of stationary and mobile power generation machines that we rely on. This seminar focuses on the process of liquid atomization and spray formation and how it relates to fuel injection systems and emission of pollutants in modern engines. The seminar begins with background coverage of terminology, the purposes of liquid atomization and spray formation, and different designs of atomizers and nozzles employed in various industries.
2015-06-15 ...
  • June 15, 2015 (8:30 a.m. - 4:30 p.m.) - Troy, Michigan
Training / Education Classroom Seminars
The principal functions of the pneumatic tire are to generate driving, braking, and cornering forces while safely carrying the vehicle load and providing adequate levels of ride comfort. This seminar explains how tire forces and moments are generated under different operating and service conditions and, in turn, demonstrates how these forces and moments influence various vehicle responses such as braking, handling, ride, and high-speed performance. The content focuses on the fundamentals of tire behavior in automobiles, trucks, and farm tractors, but also includes experimental and empirical results, when necessary.
2015-06-15 ...
  • June 15-19, 2015 (3 Sessions) - Live Online
  • December 14-17, 2015 (3 Sessions) - Live Online
Training / Education Online Web Seminars
Design Review Based on Failure Modes (DRBFM) is a methodology focused on change management and continuous improvement. It centers on early prevention and engineering knowledge, eliminating time spent debating ranking systems, waiting for lead engineers to document and list their concerns, identifying what types of concerns are open for discussion and resolution, and brainstorming without any actionable closure. This web seminar will explain all phases of the DRBFM methodology and provide details on how to accomplish the specific steps.
2015-06-08 ...
  • June 8-9, 2015 (8:30 a.m. - 4:30 p.m.) - Troy, Michigan
Training / Education Classroom Seminars
The advent of digital computers and the availability of ever cheaper and faster micro processors have brought a tremendous amount of control system applications to the automotive industry in the last two decades. From engine and transmission systems, to virtually all chassis subsystems (brakes, suspensions, and steering), some level of computer control is present. Control systems theory is also being applied to comfort systems such as climate control and safety systems such as cruise control or collision mitigation systems.
2015-06-03 ...
  • June 3-5, 2015 (8:30 a.m. - 4:30 p.m.) - Troy, Michigan
Training / Education Classroom Seminars
Fuel composition has had to change with the advent of more stringent emission regulations. Reformulated gasoline (RFG), for example, is vastly different from gasoline of even ten years ago. Tightening regulations on diesel emissions will dramatically change both diesel fuel and engine design. This three-day seminar will review the fundamentals of motor fuels, combustion and motor power generation. The primary content of the course provides a basic introduction to the technology, performance, evaluation, and specifications of current gasoline, diesel, and turbine fuels.
2015-06-02 ...
  • June 2-11, 2015 (4 Sessions) - Live Online
  • December 1-10, 2015 (4 Sessions) - Live Online
Training / Education Online Web Seminars
Analysis of tolerance stacks varies widely. This web seminar introduces the basic tools to create a common methodology for tolerance stack-ups, and ensure seamless documentation. Participants will create 1-D tolerance stacks for parts and assemblies that use geometric dimensioning and tolerancing using a tolerance stack spreadsheet. This simple, manual spreadsheet method produces an easily interpreted and checked documentation trail, and is easily adaptable to common electronic spreadsheet programs. Multiple examples will be provided to assist engineers in applying tolerance stack-up fundamentals to Y14.5 issues.
2015-06-02 ...
  • June 2, 2015 (8:30 a.m. - 4:30 p.m.) - Troy, Michigan
Training / Education Classroom Seminars
Surface texture is one of the most important topics in today's world of design, development and performance. As tolerances are shrinking and performance demands are increasing, surface texture is rapidly becoming one of the most important aspects of engine and vehicle performance. Every moving component on a vehicle or engine is influenced by surface texture in one or more of the following ways: vibration, sealing, adhesion, traction, emissions, safety, durability, wear/failure analysis. Many of the industry's top warranty issues (leaks, noise, vibration, etc.) are a direct result of surface texture implications.
2015-06-01 ...
  • June 1-5, 2015 (8:00 a.m. - 8:00 p.m.) - Troy, Michigan
Training / Education Classroom Engineering Academies
This Academy covers the diesel engine engineering principles and practices necessary to effectively understand a modern diesel engine. Types of engines addressed include naturally aspirated, turbocharged, pre-chamber, open chamber, light duty, and heavy duty. It is an intensive learning experience comprised of lecture and structured practical sessions, including a team-solved case study problem. Evening sessions are included. Attendees will receive a copy of the textbook, Diesel Emissions and Their Control, by lead instructor Magdi K. Khair and W. Addy Majewski.
2015-05-28 ...
  • May 28-29, 2015 (8:30 a.m. - 4:30 p.m.) - Troy, Michigan
Training / Education Classroom Seminars
This course presents a proven eight-step method for program planning and control, including: definition of customers' requirements, roles of the program team, determination and flowcharting of program tasks, scheduling and costing, quality aspects of critical tasks, and risk management. Easy to grasp, each of the eight steps evolve from common-sense questions that should be answered for any program, regardless of size or complexity.
Viewing 1 to 30 of 267