Aerospace - Professional Development Classroom Courses

Viewing 1 to 50 of 71
ARP4754A substantially revises the industry guidance for the development of aircraft and aircraft systems while taking into account the overall aircraft operating environment and functions. This devel...
ARP4761 describes guidelines and methods for performing safety assessments. This recommended practice is associated with showing compliance with certification requirements (14CFR/CS Parts 23 and 25, s...
Counterfeit electronic parts have been found in almost every sector of the electronics industry and continue to be an increasing threat to electronic hardware. This threat poses significant performanc...
Internal audits are a requirement of the AS9100 Rev C standard and one of the fundamental requirements of the internal audit program is to verify the compliance of the organization’s quality managemen...
Engineers and managers involved with product development are constantly challenged to reduce time to market, minimize warranty costs, and increase product quality. With less and less time for testing,...
SAE International is pleased to offer this professional development seminar in conjunction with the SAE A-6 Aerospace Actuation, Control and Fluid Power Systems Committee meeting Oct. 20-23 Santa Barb...
One of the main advantages of the precision forging process is the reduction in material consumption due to the achievement of close tolerances and the reduction of machining requirements to meet fina...
The advancement of forging technologies and processes has enabled the increased use of forged products to meet the demanding requirements of strength, durability, and reliability. While forgings are c...
In today's aerospace industry, product life-cycles are often being extended far beyond a product's original design expectations. With fewer and fewer new aerospace products being introduced into the m...
Effective and efficient management of today's complex and integrated programs requires both the refinement of interpersonal and basic leadership skills as well as the application of appropriate techno...
The certification of transport category cabin interiors requires a thorough understanding of Part 25 Transport Category aircraft cabin interior safety and crashworthiness regulations and compliance re...
SAE International is pleased to offer this professional development seminar in conjunction with the SAE A-6 Aerospace Actuation, Control and Fluid Power Systems Committee meeting Oct. 20-23 Santa Barb...
The rapidly evolving demand for cost reductions and shrinking budgets makes the application and use of automated processes within the aerospace and space industries a necessity. While some view aerosp...
Public awareness regarding pollutants and their adverse health effects has created an urgent need for engineers to better understand the combustion process as well as the pollutants formed as by-produ...
The transportation industry, including motor vehicles, aircraft, rail, marine, commercial, off-road and defense vehicles, as well as infrastructures, energy sectors, raw materials, manufacturing, heal...
Around the world, and more often than not, government bodies require formal certification of products. As product developers expand into new markets, they will be confronted with new standards, regula...
The simultaneous demands for reliability and minimum weight for aircraft and propulsion systems offer some of the most challenging technical problems that structural and safety engineers can encounter...
This four hour short course will provide an overview of design considerations for electrohydrostatic actuation for transport and business aircraft applications. The instructors will present the critic...
This four-hour short course intends to present an overview of electrically powered flight control actuation systems, covering commercial applications. The scope covers issues related to the mechanical...
This four-hour short course will present an overview of hydraulically powered flight control actuation systems used on fly-by-wire aircraft, covering both military and commercial applications. The sco...
In today’s highly competitive and liability minded environment, Design Reviews (DR) are a must for all major mobility industries such as Automotive, DOD, Aerospace, Agriculture, Recreation, Marine and...
Design reviews are required for ISO 9001:2000 compliance and compatible automotive and aerospace specifications. They are becoming increasingly important in product liability litigation and are accept...
Design for Manufacturing and Assembly (DFM+A), pioneered by Boothroyd and Dewhurst, has been used by many companies around the world to develop creative product designs that use optimal manufacturing ...
Design of Experiments (DOE) is a methodology that can be effective for general problem-solving, as well as for improving or optimizing product design and manufacturing processes. Specific applications...
Once used only sparingly in select digital avionics air vehicle interconnect applications, fiber optics technology has gained widespread acceptance and is becoming increasingly prevalent as standard e...
This four-hour short course intends to present an overview of electrohydraulic flow control servovalves commonly used in flight control and utility actuators. The scope of this course covers the histo...
View an Interview with Lead Coach Atul Kalia Why a Management Academy? Why should you be interested in this Engineering Management Academy from SAE? The answer to these questions lies in the statistic...
This interactive Failure Modes and Effects Analysis (FMEA) product and process seminar introduces the participant to the analytical process by which potential failure modes, failure effects and causes...
This four-hour short course provides an introduction to contamination control principles in aircraft hydraulic systems. Topics covered include an introduction to the types of contamination in aircraft...
The Finite Element Analysis (FEA) has been widely implemented by automotive companies and is now used by design engineers as a design tool during the product development process. Design engineers anal...
This four hour short course will provide an overview of the flight control system design of recent transport aircraft. Topics will include the principles, system architectures, power sources, and main...
There is a potential for metal fatigue in any situation where a component is subjected to cyclic loads. Fatigue failures of various types are a key concern in increasing the reliability of products. P...
This in-depth course covers the GD&T system per ASME Y14.5-2009, including why it reduces costs, how to interpret the symbols, and how to apply these tolerances correctly. Participants will learn the ...
This four hour course provides an overview of hydraulic tubing installations, principles, and design criteria. Although the primary focus is airplanes, the requirements and principles covered are vali...
Through the years there has been a significant and increasing volume of fraudulent and counterfeit electronic parts entering the aerospace supply chain. Left undetected, these parts can pose significa...
Individuals responsible for quality management system, implementation, and transition to the AS9100:2009 series of standards for Aviation, Space, and Defense will require an understanding of the requi...
Integrated Vehicle Health Management (IVHM) is an end-to-end capability that transforms system data into operational support information. This information has the ability to optimize vehicle maintenan...
This four-hour short course provides an overview of hydraulic system design of recently developed business and commercial aircraft. Topics will include hydraulic principles, system architectures, powe...
The challenges associated with using composites as a replacement for aluminum reside primarily in the complex manufacturing processes and technologies for fabricating composite parts. The high cost of...
The international standard titled DO-178C - Software Considerations in Airborne Systems and Equipment Certification is the primary standard for commercial avionics software development. This standard ...
Failure Mode and Effects Analysis (FMEA) is a systematic method for preventing failure through the discovery and mitigation of potential failure modes and their cause mechanisms. Actions are developed...
Welding is one of the most important and widely used of the joining processes, providing distinct advantages in mechanical performance, ease of implementation, cost and adaptability. This seminar will...
The planetary gear train is a core component of the automatic transmission system. The ability of the planetary gear train to deliver reliable gains in power, durability, higher torque-to-weight ratio...
Product development is organizationally a complex undertaking that requires effective coordination within a company and between companies. During product development, teams are confronted with a numbe...
Liquid fuel atomization and spray formation is the heart of the majority of stationary and mobile power generation machines that we rely on. This seminar focuses on the process of liquid atomization a...
In the fast paced and competitive environment of today's global economy, the work of technical professionals is often the difference between success and failure in an organization. Providing leadershi...
Microbial contamination in aviation fuel creates biomats that clog filters and scavenge systems, coat fuel quality indicator systems (FQIS) probes, and lead to structural corrosion, impacting the oper...
This information-packed seminar focuses on the intricacies of patents, patent infringement litigation and patent licensing. Attendees will explore the important subjects of obtaining U.S. and foreign ...
A comprehensive and practical understanding of planetary gear trains is critical for individuals involved with the design and development of automatic transmissions. A key component of the automatic t...
SAE International is pleased to offer this professional development seminar in conjunction with the SAE A-6 Aerospace Actuation, Control and Fluid Power Systems Committee meeting Oct. 20-23 Santa Barb...
Viewing 1 to 50 of 71